TDH35P2R00JE Ohmite component image

TDH35P2R00JE

In Stock

Ohmite logo Ohmite · franchised distributor

RES SMD 2 OHM 5% 35W D2PAK

Listed in Chip Resistor - Surface Mount

495 pcs in stock ships same day before 6pm

from $5.7510

Quantity Unit Price
1 - 9 $11.0400
10 - 24 $10.3523
25 - 49 $9.6619
50 - 99 $8.5116
100 - 249 $7.3613
250 - 499 $6.6712
500 - 999 $6.2111
1,000+ $5.7510 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TDH35P2R00JE?

TDH35P2R00JE is a res smd 2 ohm 5% 35w d2pak, featuring a power rating of 35W, a tolerance of ±5%, a Thick Film composition, and the TO-263-3, D²Pak (2 Leads + Tab), TO-263AB case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Ohmite Series Variants in Stock

38 variants of this series in stock
Part Number Description Stock Unit Price Status
TDH35PR360JE RES 0.36 OHM 5% 35W D2PAK 469 $11.7700 In Stock
TDH35P33R0JE RES SMD 33 OHM 5% 35W D2PAK 532 $10.0800 In Stock
TDH35PR200JE RES 0.2 OHM 5% 35W D2PAK 704 $7.6238 In Stock
TDH35P20R0JE RES SMD 20 OHM 5% 35W D2PAK 530 $10.0800 In Stock
TDH35P250RJE RES SMD 250 OHM 5% 35W D2PAK 528 $10.0800 In Stock
TDH35PR250JE RES 0.25 OHM 5% 35W D2PAK 692 $7.6238 In Stock
TDH35P1K50JE RES SMD 1.5K OHM 5% 35W D2PAK 785 $6.7200 In Stock
TDH35PR500FE RES 0.5 OHM 1% 35W D2PAK 970 $5.3577 In Stock
TDH35PR150JE RES SMD 150M OHM 5% 35W TO263-3 656 $8.1510 In Stock
TDH35P68R0JE RES SMD 68 OHM 5% 35W D2PAK 539 $10.0800 In Stock
+ 28 more variants in stock — browse the full category

Technical Parameters

TDH35P2R00JE Specifications

Series TDH35
Package Bulk
Part Status Active
Resistance 2 Ohms
Tolerance ±5%
Power (Watts) 35W
Composition Thick Film
Features Moisture Resistant
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package D2PAK
Ratings -
Size / Dimension 0.398" L x 0.378" W (10.10mm x 9.60mm)
Height - Seated (Max) 0.185" (4.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TDH35P3R00JE RES SMD 3 OHM 5% 35W D2PAK 498 $11.0400 76%
TDH35P1R00JE RES SMD 1 OHM 5% 35W D2PAK 484 $11.0400 58%
TDH35P2R00J RES SMD 2 OHM 5% 35W D2PAK 1,602 RFQ 100%
TDH35P3R00J RES SMD 3 OHM 5% 35W D2PAK 4,558 RFQ 76%
TDH35P1R00J RES SMD 1 OHM 5% 35W D2PAK 4,266 RFQ 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need TDH35P2R00JE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.