TDH35PR200JE Ohmite component image

TDH35PR200JE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 0.2 OHM 5% 35W D2PAK

Listed in Chip Resistor - Surface Mount

704 pcs in stock ships same day before 6pm

from $4.2965

Quantity Unit Price
1 - 9 $7.6238
10 - 24 $6.9298
25 - 49 $6.2369
50 - 99 $5.3707
100 - 249 $4.9375
250 - 499 $4.6777
500 - 999 $4.5044
1,000+ $4.2965 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TDH35PR200JE?

TDH35PR200JE is a res 0.2 ohm 5% 35w d2pak, featuring a power rating of 35W, a tolerance of ±5%, a Thick Film composition, and the TO-263-3, D²Pak (2 Leads + Tab), TO-263AB case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Ohmite Series Variants in Stock

38 variants of this series in stock
Part Number Description Stock Unit Price Status
TDH35PR360JE RES 0.36 OHM 5% 35W D2PAK 469 $11.7700 In Stock
TDH35P33R0JE RES SMD 33 OHM 5% 35W D2PAK 532 $10.0800 In Stock
TDH35P20R0JE RES SMD 20 OHM 5% 35W D2PAK 530 $10.0800 In Stock
TDH35P250RJE RES SMD 250 OHM 5% 35W D2PAK 528 $10.0800 In Stock
TDH35PR250JE RES 0.25 OHM 5% 35W D2PAK 692 $7.6238 In Stock
TDH35P1K50JE RES SMD 1.5K OHM 5% 35W D2PAK 785 $6.7200 In Stock
TDH35PR500FE RES 0.5 OHM 1% 35W D2PAK 970 $5.3577 In Stock
TDH35PR150JE RES SMD 150M OHM 5% 35W TO263-3 656 $8.1510 In Stock
TDH35P68R0JE RES SMD 68 OHM 5% 35W D2PAK 539 $10.0800 In Stock
TDH35P500RJE RES SMD 500 OHM 5% 35W D2PAK 543 $10.0800 In Stock
+ 28 more variants in stock — browse the full category

Technical Parameters

TDH35PR200JE Specifications

Series TDH35
Package Bulk
Part Status Active
Resistance 200 mOhms
Tolerance ±5%
Power (Watts) 35W
Composition Thick Film
Features Moisture Resistant
Temperature Coefficient ±700ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package D2PAK
Ratings -
Size / Dimension 0.398" L x 0.378" W (10.10mm x 9.60mm)
Height - Seated (Max) 0.185" (4.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TDH35PR250JE RES 0.25 OHM 5% 35W D2PAK 692 $7.6238 87%
TDH35PR150JE RES SMD 150M OHM 5% 35W TO263-3 656 $8.1510 83%
TDH35PR300JE RES 0.3 OHM 5% 35W D2PAK 705 $7.6238 76%
TDH35PR360JE RES 0.36 OHM 5% 35W D2PAK 469 $11.7700 65%
TDH35PR100JE RES 0.1 OHM 5% 35W D2PAK 445 $12.5800 58%
TDH35PR200J RES 0.2 OHM 5% 35W D2PAK 2,323 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need TDH35PR200JE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.