TDH35PR500FE Ohmite component image

TDH35PR500FE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 0.5 OHM 1% 35W D2PAK

Listed in Chip Resistor - Surface Mount

970 pcs in stock ships same day before 6pm

from $5.3577

Quantity Unit Price
1+ $5.3577 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TDH35PR500FE?

TDH35PR500FE is a res 0.5 ohm 1% 35w d2pak, featuring a power rating of 35W, a tolerance of ±1%, a Thick Film composition, and the TO-263-3, D²Pak (2 Leads + Tab), TO-263AB case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

38 variants of this series in stock
Part Number Description Stock Unit Price Status
TDH35PR360JE RES 0.36 OHM 5% 35W D2PAK 469 $11.7700 In Stock
TDH35P33R0JE RES SMD 33 OHM 5% 35W D2PAK 532 $10.0800 In Stock
TDH35PR200JE RES 0.2 OHM 5% 35W D2PAK 704 $7.6238 In Stock
TDH35P20R0JE RES SMD 20 OHM 5% 35W D2PAK 530 $10.0800 In Stock
TDH35P250RJE RES SMD 250 OHM 5% 35W D2PAK 528 $10.0800 In Stock
TDH35PR250JE RES 0.25 OHM 5% 35W D2PAK 692 $7.6238 In Stock
TDH35P1K50JE RES SMD 1.5K OHM 5% 35W D2PAK 785 $6.7200 In Stock
TDH35PR150JE RES SMD 150M OHM 5% 35W TO263-3 656 $8.1510 In Stock
TDH35P68R0JE RES SMD 68 OHM 5% 35W D2PAK 539 $10.0800 In Stock
TDH35P500RJE RES SMD 500 OHM 5% 35W D2PAK 543 $10.0800 In Stock
+ 28 more variants in stock — browse the full category

Technical Parameters

TDH35PR500FE Specifications

Series TDH35
Package Bulk
Part Status Active
Resistance 500 mOhms
Tolerance ±1%
Power (Watts) 35W
Composition Thick Film
Features Moisture Resistant
Temperature Coefficient ±700ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package D2PAK
Ratings -
Size / Dimension 0.398" L x 0.378" W (10.10mm x 9.60mm)
Height - Seated (Max) 0.185" (4.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TDH35HR500FE RES 0.5 OHM 35W SMD DPAK HI TEMP 3,129 RFQ 100%
TDH35PR500JE RES 0.5 OHM 5% 35W D2PAK 480 $11.4700 75%
TDH35PR470JE RES 0.47 OHM 5% 35W D2PAK 692 $7.6480 71%
TDH35PR360JE RES 0.36 OHM 5% 35W D2PAK 469 $11.7700 55%
TDH35PR750JE RES 0.75 OHM 5% 35W D2PAK 500 $11.0400 51%
TDH35PR500J RES 0.5 OHM 5% 35W D2PAK 2,151 RFQ 75%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need TDH35PR500FE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.