W7M39R0J J.W. Miller / Bourns component image

W7M39R0J

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES 39 OHM 5% 7W AXIAL

Listed in Through Hole Resistors

23,543 pcs in stock ships same day before 6pm

from $0.2128

Quantity Unit Price
1 - 1,999 $0.2128 BEST
2,000+ $0.2128 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the W7M39R0J?

W7M39R0J is a res 39 ohm 5% 7w axial, featuring a power rating of 7W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

J.W. Miller / Bourns Series Variants in Stock

13 variants of this series in stock
Part Number Description Stock Unit Price Status
W2M1000J RES 100 OHM 2W 5% AXIAL 12,864 $0.3900 In Stock
W3M39R0J RES 39 OHM 5% 3W AXIAL 57,030 $0.0878 In Stock
W1M22R0J RES 22 OHM 1W 5% AXIAL 116,996 $0.0428 In Stock
W5M82R0J RES 82 OHM 5% 5W AXIAL 43,608 $0.1148 In Stock
W2M1200J RES 120 OHM 5% 2W AXIAL 86,162 $0.0581 In Stock
W7M56R0J RES 56 OHM 5% 7W AXIAL 23,545 $0.2128 In Stock
W3M22R0J RES 22 OHM 3W 5% AXIAL 57,025 $0.0878 In Stock
W1M33R0J RES 33 OHM 1W 5% AXIAL 13,933 $0.3600 In Stock
W5M33R0J RES 33 OHM 5% 5W AXIAL 8,377 $0.6000 In Stock
W2M33R0J RES 33 OHM 5% 2W AXIAL 86,163 $0.0581 In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

W7M39R0J Specifications

Series W
Package Bulk
Part Status Active
Resistance 39 Ohms
Tolerance ±5%
Power (Watts) 7W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 200°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.335" Dia x 0.965" L (8.50mm x 24.50mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
KNP-50JB-52-39R RES WW 1/2W 5% AXIAL 123,503 $0.0405 100%
KNP50SJT-52-39R RES WW 1/2W 5% AXIAL 192,714 $0.0260 100%
PNP7WVFT-91-39R RES WW 7W 1% AXIAL 10,790 $0.4655 75%
CA510039R00KS70 RES 39 OHM 5W 10% AXIAL 12,576 $0.3990 68%
KNP3WSJT-73-39R RES WW 3W 5% AXIAL 48,131 $0.1040 67%
PNP1WVJR-52-39R RES WW 1W 5% AXIAL 63,297 $0.0790 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need W7M39R0J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.