TS912IN STMicroelectronics component image

TS912IN

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP GP 2 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

634 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TS912IN?

TS912IN is a ic opamp gp 2 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

STMicroelectronics Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
TS912IYDT IC OPAMP GP 2 CIRCUIT 8SO 3,209 $1.5800 In Stock
TS912ID IC OPAMP GP 2 CIRCUIT 8SO 1,826 $2.8100 In Stock
TS912AID IC OPAMP GP 2 CIRCUIT 8SO 3,581 RFQ In Stock
TS912IDT IC OPAMP GP 2 CIRCUIT 8SO 4,232 $1.1900 In Stock
TS912AIN IC OPAMP GP 2 CIRCUIT 8DIP 4,362 RFQ In Stock
TS912BID IC OPAMP GP 2 CIRCUIT 8SO 834 RFQ In Stock
TS912AIYDT IC OPAMP GP 2 CIRCUIT 8SO 5,153 $0.9783 In Stock
TS912BIYDT IC OPAMP GP 2 CIRCUIT 8SO 4,332 $1.1655 In Stock
TS912BIDT IC OPAMP GP 2 CIRCUIT 8SO 2,812 $1.8000 In Stock
TS912AIDT IC OPAMP GP 2 CIRCUIT 8SO 3,369 $1.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TS912IN Specifications

Series Automotive, AEC-Q100
Package Tube
Part Status Obsolete
Amplifier Type CMOS
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 1.3V/µs
Gain Bandwidth Product 1.4 MHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 10 mV
Current - Supply 400µA (x2 Channels)
Current - Output / Channel 75 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 16V, ±1.35V ~ 8V
Operating Temperature -40°C ~ 125°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-DIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV2371IP IC OPAMP GP 1 CIRCUIT 8DIP 2,988 $1.7000 100%
TLV2371IPG4 IC OPAMP GP 1 CIRCUIT 8DIP 4,986 $1.0091 100%
LM6142BIN/NOPB IC OPAMP GP 2 CIRCUIT 8DIP 1,073 $4.8100 100%
TLV2370IPE4 IC GP OPAMP 1 CIRCUIT 8DIP 7,980 $0.6300 100%
LM6142BIN OPERATIONAL AMPLIFIER, 2 FUNC, 2 1,833 $2.8000 100%
TLV2370IP TLV2370 SINGLE 550-UA/CHANNEL, 3 5,993 $0.8400 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need TS912IN or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.