TS912IDT STMicroelectronics component image

TS912IDT

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP GP 2 CIRCUIT 8SO

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

4,232 pcs in stock ships same day before 6pm

from $0.3854

Quantity Unit Price
1 - 2,499 $1.1900
2,500 - 4,999 $0.4215
5,000 - 12,499 $0.4004
12,500+ $0.3854 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TS912IDT?

TS912IDT is a ic opamp gp 2 circuit 8so, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

STMicroelectronics Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
TS912IYDT IC OPAMP GP 2 CIRCUIT 8SO 3,209 $1.5800 In Stock
TS912ID IC OPAMP GP 2 CIRCUIT 8SO 1,826 $2.8100 In Stock
TS912AID IC OPAMP GP 2 CIRCUIT 8SO 3,581 RFQ In Stock
TS912AIN IC OPAMP GP 2 CIRCUIT 8DIP 4,362 RFQ In Stock
TS912BID IC OPAMP GP 2 CIRCUIT 8SO 834 RFQ In Stock
TS912AIYDT IC OPAMP GP 2 CIRCUIT 8SO 5,153 $0.9783 In Stock
TS912IN IC OPAMP GP 2 CIRCUIT 8DIP 634 RFQ In Stock
TS912BIYDT IC OPAMP GP 2 CIRCUIT 8SO 4,332 $1.1655 In Stock
TS912BIDT IC OPAMP GP 2 CIRCUIT 8SO 2,812 $1.8000 In Stock
TS912AIDT IC OPAMP GP 2 CIRCUIT 8SO 3,369 $1.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TS912IDT Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type CMOS
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 1.3V/µs
Gain Bandwidth Product 1.4 MHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 10 mV
Current - Supply 400µA (x2 Channels)
Current - Output / Channel 75 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 16V, ±1.35V ~ 8V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
LM6132BIM/NOPB IC OPAMP GP 2 CIRCUIT 8SOIC 1,115 $4.6400 100%
TLV2370IDR TLV2370 SINGLE 550-UA/CHANNEL, 3 6,978 $0.7200 100%
LM6142BIMX/NOPB IC OPAMP GP 2 CIRCUIT 8SOIC 1,106 $4.6700 100%
TLV2371IDR IC OPAMP GP 1 CIRCUIT 8SOIC 3,587 $1.4100 100%
LM6142AIM/NOPB IC OPAMP GP 2 CIRCUIT 8SOIC 679 $7.7000 100%
TLV2372IDR IC OPAMP GP 2 CIRCUIT 8SOIC 2,838 $1.7900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need TS912IDT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.