TLV2461QDRG4Q1 Texas Instruments component image

TLV2461QDRG4Q1

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

3,445 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLV2461QDRG4Q1?

TLV2461QDRG4Q1 is a ic opamp gp 1 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
TLV2460QPWRG4Q1 IC OPAMP GP 1 CIRCUIT 8TSSOP 4,073 $1.2425 In Stock
TLV2464AQPWRG4Q1 IC OPAMP GP 4 CIRCUIT 14TSSOP 1,434 $3.6100 In Stock
TLV2460AQDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 1,699 RFQ In Stock
TLV2461AQDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 3,485 RFQ In Stock
TLV2463AQDRG4Q1 IC OPAMP GP 2 CIRCUIT 14SOIC 969 RFQ In Stock
TLV2461QPWRG4Q1 IC OPAMP GP 1 CIRCUIT 8TSSOP 4,357 $1.1590 In Stock
TLV2460QDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 1,390 RFQ In Stock
TLV2463QPWRG4Q1 IC OPAMP GP 2 CIRCUIT 14TSSOP 2,897 $1.7435 In Stock
TLV2463QDRG4Q1 IC OPAMP GP 2 CIRCUIT 14TSSOP 4,155 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TLV2461QDRG4Q1 Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)
Part Status Discontinued at Digi-Key
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 1.6V/µs
Gain Bandwidth Product 6.4 MHz
-3db Bandwidth -
Current - Input Bias 1.3 nA
Voltage - Input Offset 500 µV
Current - Supply 550µA
Current - Output / Channel 80 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 6V, ±1.35V ~ 3V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV2461CDR TLV2461 SINGLE, LOW POWER, RAIL- 5,723 $0.8800 100%
TLV2462AQD TLV2462A DUAL LOW POWER, LOW OFF 2,763 $1.8400 100%
TLV2462AQDRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 2,439 $2.0775 100%
TLV2460CDR TLV2460 SINGLE, LOW POWER, RAIL- 5,301 $0.9500 100%
TLV2460QDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 1,390 RFQ 100%
TLV2461QD IC OPAMP GP 1 CIRCUIT 8SOIC 854 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLV2461QDRG4Q1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.