TLV2460QDRG4Q1 Texas Instruments component image

TLV2460QDRG4Q1

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,390 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLV2460QDRG4Q1?

TLV2460QDRG4Q1 is a ic opamp gp 1 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
TLV2460QPWRG4Q1 IC OPAMP GP 1 CIRCUIT 8TSSOP 4,073 $1.2425 In Stock
TLV2464AQPWRG4Q1 IC OPAMP GP 4 CIRCUIT 14TSSOP 1,434 $3.6100 In Stock
TLV2460AQDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 1,699 RFQ In Stock
TLV2461AQDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 3,485 RFQ In Stock
TLV2463AQDRG4Q1 IC OPAMP GP 2 CIRCUIT 14SOIC 969 RFQ In Stock
TLV2461QPWRG4Q1 IC OPAMP GP 1 CIRCUIT 8TSSOP 4,357 $1.1590 In Stock
TLV2461QDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 3,445 RFQ In Stock
TLV2463QPWRG4Q1 IC OPAMP GP 2 CIRCUIT 14TSSOP 2,897 $1.7435 In Stock
TLV2463QDRG4Q1 IC OPAMP GP 2 CIRCUIT 14TSSOP 4,155 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TLV2460QDRG4Q1 Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)
Part Status Discontinued at Digi-Key
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 1.6V/µs
Gain Bandwidth Product 6.4 MHz
-3db Bandwidth -
Current - Input Bias 1.3 nA
Voltage - Input Offset 500 µV
Current - Supply 550µA
Current - Output / Channel 80 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 6V, ±1.35V ~ 3V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV2462AQD TLV2462A DUAL LOW POWER, LOW OFF 2,763 $1.8400 100%
TLV2462AQDRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 2,439 $2.0775 100%
TLV2461CDR TLV2461 SINGLE, LOW POWER, RAIL- 5,723 $0.8800 100%
TLV2460CDR TLV2460 SINGLE, LOW POWER, RAIL- 5,301 $0.9500 100%
TLV2461QDRG4Q1 IC OPAMP GP 1 CIRCUIT 8SOIC 3,445 RFQ 100%
TLV2462QD IC GP OPAMP 2 CIRCUIT 8SOIC 3,999 $1.2600 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLV2460QDRG4Q1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.