TLC25L2CPWR Texas Instruments component image

TLC25L2CPWR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 8TSSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,160 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLC25L2CPWR?

TLC25L2CPWR is a ic opamp gp 2 circuit 8tssop, featuring the 8-TSSOP (0.173", 4.40mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
TLC25L2CPWRG4 IC OPAMP GP 2 CIRCUIT 8TSSOP 1,178 RFQ In Stock
TLC252BCDRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 4,097 RFQ In Stock
TLC25L2CPS IC OPAMP GP 2 CIRCUIT 8SO 3,313 RFQ In Stock
TLC25L2CPSRG4 IC OPAMP GP 2 CIRCUIT 8SO 2,195 RFQ In Stock
TLC252CP IC OPAMP GP 2 CIRCUIT 8DIP 921 $5.7400 In Stock
TLC25M2CD IC OPAMP GP 2 CIRCUIT 8SOIC 940 $5.5700 In Stock
TLC252CDR IC OPAMP GP 2 CIRCUIT 8SOIC 1,673 $3.0461 In Stock
TLC25L2CPSG4 IC OPAMP GP 2 CIRCUIT 8SO 1,759 RFQ In Stock
TLC252CPG4 IC OPAMP GP 2 CIRCUIT 8DIP 1,216 $4.2249 In Stock
TLC252CPS IC OPAMP GP 2 CIRCUIT 8SO 4,244 RFQ In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

TLC25L2CPWR Specifications

Series LinCMOS™
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type CMOS
Number of Circuits 2
Output Type Open Drain
Slew Rate 2.9V/µs
Gain Bandwidth Product 110 kHz
-3db Bandwidth -
Current - Input Bias 0.7 pA
Voltage - Input Offset 1.1 mV
Current - Supply 29µA (x2 Channels)
Current - Output / Channel -
Voltage - Supply, Single/Dual (±) 1.4V ~ 16V, ±0.7V ~ 8V
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173", 4.40mm Width)
Supplier Device Package 8-TSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLC252CPW OPERATIONAL AMPLIFIER 3,160 $1.6000 100%
TLC252CPWLE DUAL OPERATIONAL AMPLIFIER 6,292 $0.8000 100%
TLC252CPWR TLC252 DUAL LOW-VOLTAGE OPERATIO 1,898 $2.7000 100%
TLC25M2CPWLE OPERATIONAL AMPLIFIER 6,299 $0.8000 100%
TLC251CPW OPERATIONAL AMPLIFIER 4,469 $1.1300 100%
TSC102IPT IC CURR SENSE 1 CIRCUIT 8TSSOP 3,793 $1.3300 93%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLC25L2CPWR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.