TLC252BCDRG4 Texas Instruments component image

TLC252BCDRG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

4,097 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLC252BCDRG4?

TLC252BCDRG4 is a ic opamp gp 2 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
TLC25L2CPWRG4 IC OPAMP GP 2 CIRCUIT 8TSSOP 1,178 RFQ In Stock
TLC25L2CPS IC OPAMP GP 2 CIRCUIT 8SO 3,313 RFQ In Stock
TLC25L2CPSRG4 IC OPAMP GP 2 CIRCUIT 8SO 2,195 RFQ In Stock
TLC252CP IC OPAMP GP 2 CIRCUIT 8DIP 921 $5.7400 In Stock
TLC25M2CD IC OPAMP GP 2 CIRCUIT 8SOIC 940 $5.5700 In Stock
TLC252CDR IC OPAMP GP 2 CIRCUIT 8SOIC 1,673 $3.0461 In Stock
TLC25L2CPSG4 IC OPAMP GP 2 CIRCUIT 8SO 1,759 RFQ In Stock
TLC252CPG4 IC OPAMP GP 2 CIRCUIT 8DIP 1,216 $4.2249 In Stock
TLC252CPS IC OPAMP GP 2 CIRCUIT 8SO 4,244 RFQ In Stock
TLC25L2CPWG4 IC OPAMP GP 2 CIRCUIT 8TSSOP 3,317 RFQ In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

TLC252BCDRG4 Specifications

Series LinCMOS™
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type CMOS
Number of Circuits 2
Output Type Open Drain
Slew Rate 2.9V/µs
Gain Bandwidth Product 2.2 MHz
-3db Bandwidth -
Current - Input Bias 0.6 pA
Voltage - Input Offset 290 µV
Current - Supply 1.9mA (x2 Channels)
Current - Output / Channel -
Voltage - Supply, Single/Dual (±) 1.4V ~ 16V, ±0.7V ~ 8V
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLC272BCD IC OPAMP GP 2 CIRCUIT 8SOIC 3,152 $1.6100 65%
TLC272BCDRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 6,946 $0.7248 65%
TLC272BCDR IC OPAMP GP 2 CIRCUIT 8SOIC 3,334 $1.5200 65%
TLC272BID IC OPAMP GP 2 CIRCUIT 8SOIC 3,030 $1.6700 52%
TLC272BIDRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 6,624 $0.7582 52%
TLC272BIDR IC OPAMP GP 2 CIRCUIT 8SOIC 3,181 $1.5900 52%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLC252BCDRG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.