THS4062CDGNR Texas Instruments component image

THS4062CDGNR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP VFB 2 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,405 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4062CDGNR?

THS4062CDGNR is a ic opamp vfb 2 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

13 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4062CD IC OPAMP VFB 2 CIRCUIT 8SOIC 775 $6.8500 In Stock
THS4061IDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 1,366 $3.7600 In Stock
THS4061CDG4 IC OPAMP VFB 1 CIRCUIT 8SOIC 1,562 $3.2968 In Stock
THS4062IDGNRG4 IC OPAMP VFB 2 CIRCUIT 8MSOP 1,458 $3.5437 In Stock
THS4062ID IC OPAMP VFB 2 CIRCUIT 8SOIC 831 $6.3800 In Stock
THS4061IDGNG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 2,114 RFQ In Stock
THS4062IDR IC VOLTAGE FEEDBACK 2 CIRC 8SOIC 2,116 $2.4000 In Stock
THS4062CDGNRG4 IC OPAMP VFB 2 CIRCUIT 8MSOP 4,621 RFQ In Stock
THS4061IDGN IC OPAMP VFB 1 CIRCUIT 8MSOP 3,244 RFQ In Stock
THS4062CDG4 IC OPAMP VFB 2 CIRCUIT 8SOIC 776 $6.8500 In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

THS4062CDGNR Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type Voltage Feedback
Number of Circuits 2
Output Type -
Slew Rate 400V/µs
Gain Bandwidth Product -
-3db Bandwidth 180 MHz
Current - Input Bias 3 µA
Voltage - Input Offset 2.5 mV
Current - Supply 7.8mA (x2 Channels)
Current - Output / Channel 115 mA
Voltage - Supply, Single/Dual (±) 9V ~ 32V, ±4.5V ~ 16V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4011IDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 969 $5.3500 100%
THS4042IDGNR THS4042 165-MHZ C-STABLE VOLTAGE 885 $5.9200 100%
THS4052IDGNR THS4052 70-MHZ LOW-COST VOLTAGE- 2,048 $2.4800 100%
THS4011IDGNRG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 1,534 $3.3684 100%
THS4052CDGNR IC OPAMP VFB 2 CIRCUIT 8MSOP 1,223 $4.2000 100%
THS4012CDGNG4 THS4012 290-MHZ DUAL LOW-DISTORT 980 $5.3100 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4062CDGNR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.