THS4052CDGNR Texas Instruments component image

THS4052CDGNR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP VFB 2 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,223 pcs in stock ships same day before 6pm

from $2.1067

Quantity Unit Price
1 - 2,499 $4.2000
2,500+ $2.1067 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4052CDGNR?

THS4052CDGNR is a ic opamp vfb 2 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4051CDR IC OPAMP VFB 1 CIRCUIT 8SOIC 3,280 $1.5431 In Stock
THS4052IDGN IC OPAMP VFB 2 CIRCUIT 8MSOP 941 $5.5000 In Stock
THS4052CD IC OPAMP VFB 2 CIRCUIT 8SOIC 1,101 $4.7500 In Stock
THS4051IDR IC OPAMP VFB 1 CIRCUIT 8SOIC 2,988 $1.6917 In Stock
THS4051IDRG4 IC OPAMP VFB 1 CIRCUIT 8SOIC 2,994 $1.6917 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

THS4052CDGNR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type Voltage Feedback
Number of Circuits 2
Output Type -
Slew Rate 240V/µs
Gain Bandwidth Product -
-3db Bandwidth 70 MHz
Current - Input Bias 2.5 µA
Voltage - Input Offset 2.5 mV
Current - Supply 8.5mA (x2 Channels)
Current - Output / Channel 100 mA
Voltage - Supply, Single/Dual (±) 9V ~ 32V, ±4.5V ~ 16V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4052IDGNR THS4052 70-MHZ LOW-COST VOLTAGE- 2,048 $2.4800 100%
THS4042IDGN THS4042 165-MHZ C-STABLE VOLTAGE 746 $7.0800 100%
THS4042IDGNR THS4042 165-MHZ C-STABLE VOLTAGE 885 $5.9200 100%
THS4042CDGN THS4042 165-MHZ C-STABLE VOLTAGE 765 $6.9300 100%
THS4051CDGN THS4051 70-MHZ LOW-COST VOLTAGE- 2,677 $1.9000 100%
THS4011IDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 969 $5.3500 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4052CDGNR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.