THS4042CDGNR Texas Instruments component image

THS4042CDGNR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP VFB 2 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

584 pcs in stock ships same day before 6pm

from $5.0674

Quantity Unit Price
1 - 2,499 $9.2800
2,500+ $5.0674 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4042CDGNR?

THS4042CDGNR is a ic opamp vfb 2 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

12 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4041CDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 998 $5.2000 In Stock
THS4041CD IC OPAMP VFB 1 CIRCUIT 8SOIC 805 $6.6200 In Stock
THS4042CDG4 IC OPAMP VFB 2 CIRCUIT 8SOIC 538 $10.1653 In Stock
THS4041IDRG4 IC OPAMP VFB 1 CIRCUIT 8SOIC 2,498 RFQ In Stock
THS4041ID IC OPAMP VFB 1 CIRCUIT 8SOIC 764 $6.8600 In Stock
THS4041CDGNG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 3,434 RFQ In Stock
THS4041IDGNG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 913 RFQ In Stock
THS4042CDRG4 IC OPAMP VFB 2 CIRCUIT 8SOIC 2,259 RFQ In Stock
THS4041IDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 953 $5.4300 In Stock
THS4042IDRG4 IC OPAMP VFB 2 CIRCUIT 8SOIC 2,141 RFQ In Stock
+ 2 more variants in stock — browse the full category

Technical Parameters

THS4042CDGNR Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type Voltage Feedback
Number of Circuits 2
Output Type -
Slew Rate 400V/µs
Gain Bandwidth Product -
-3db Bandwidth 165 MHz
Current - Input Bias 2.5 µA
Voltage - Input Offset 2.5 mV
Current - Supply 8mA (x2 Channels)
Current - Output / Channel 100 mA
Voltage - Supply, Single/Dual (±) 9V ~ 32V, ±4.5V ~ 16V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4041IDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 953 $5.4300 100%
THS4052CDGN THS4052 70-MHZ LOW-COST VOLTAGE- 1,859 $2.7600 100%
THS4011IDGN THS4011 290-MHZ LOW-DISTORTION V 1,469 $3.5100 100%
THS4062CDGN THS4062 180-MHZ HIGH OUTPUT DRIV 1,323 $3.8700 100%
THS4012CDGN THS4012 290-MHZ DUAL LOW-DISTORT 973 $5.3100 100%
THS4051IDGNR THS4051 70-MHZ LOW-COST VOLTAGE- 2,890 $1.7600 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4042CDGNR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.