THS4011IDGN Rochester Electronics component image

THS4011IDGN

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

THS4011 290-MHZ LOW-DISTORTION V

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,469 pcs in stock ships same day before 6pm

from $3.5100

Quantity Unit Price
1 - 159 $3.5100 BEST
160+ $3.5100 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4011IDGN?

THS4011IDGN is a ths4011 290-mhz low-distortion v, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4012IDGN THS4012 290-MHZ DUAL LOW-DISTORT 947 $5.4500 In Stock
THS4012CDGNG4 THS4012 290-MHZ DUAL LOW-DISTORT 980 $5.3100 In Stock
THS4012CDR THS4012 290-MHZ DUAL LOW-DISTORT 1,220 $4.2100 In Stock
THS4012CDGN THS4012 290-MHZ DUAL LOW-DISTORT 973 $5.3100 In Stock
THS4011CDR THS4011 290-MHZ LOW-DISTORTION V 1,963 $2.5900 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

THS4011IDGN Specifications

Series -
Package Bulk
Part Status Active
Amplifier Type Voltage Feedback
Number of Circuits 1
Output Type -
Slew Rate 310V/µs
Gain Bandwidth Product 290 MHz
-3db Bandwidth 290 MHz
Current - Input Bias 2 µA
Voltage - Input Offset 1 mV
Current - Supply 7.8mA
Current - Output / Channel 110 mA
Voltage - Supply, Single/Dual (±) 9V ~ 32V, ±4.5V ~ 16V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4041IDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 953 $5.4300 100%
THS4042CDGNR IC OPAMP VFB 2 CIRCUIT 8MSOP 584 $9.2800 100%
THS4051IDGN THS4051 70-MHZ LOW-COST VOLTAGE- 2,490 $2.0400 100%
THS4052CDGN THS4052 70-MHZ LOW-COST VOLTAGE- 1,859 $2.7600 100%
THS4051CDGNR THS4051 70-MHZ LOW-COST VOLTAGE- 3,116 $1.6300 100%
THS4062CDGN THS4062 180-MHZ HIGH OUTPUT DRIV 1,323 $3.8700 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need THS4011IDGN or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.