SX1232IMLTRT Semtech component image

SX1232IMLTRT

In Stock

Semtech logo Semtech · franchised distributor

IC RF TXRX ISM<1GHZ 24VQFN

Listed in RF Transceiver ICs

1,453 pcs in stock ships same day before 6pm

from $1.6193

Quantity Unit Price
1 - 2,999 $3.5600
3,000 - 5,999 $1.6891
6,000+ $1.6193 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SX1232IMLTRT?

SX1232IMLTRT is a ic rf txrx ism<1ghz 24vqfn, featuring a frequency of 862Mhz ~ 1.02GHz, the 24-VQFN Exposed Pad case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Semtech Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
SC1116ISKTRT IC REG CTRLR DDR 1OUT SOT23-6 1,907 RFQ In Stock
GS4900BCNE3 IC CLK FREQ GEN VID GENLOCK 485 $11.3039 In Stock
GS4901BCNE3 IC CLK FREQ GEN VID GENLOCK 295 $19.3816 In Stock
SX8651ICSTRT IC SCREEN CNTRL 12BIT 12WLCSP 1,768 $2.8800 In Stock
SX8651IWLTRT IC SCREEN CNTRL 12BIT 12DFN 1,787 $2.8500 In Stock
SX1272DVK1BAS SX1272 868MHZ DEVELOPMENT KIT 58 $598.8000 In Stock
SX1272DVK1CAS SX1272 915MHZ DEVELOPMENT KIT 48 $598.8000 In Stock
SX1280DVK1ZHP SX1280 2.4GHZ DEVELOPMENT KIT 44 $478.8000 In Stock
SX1232-32SKA868 KIT EVALUATION SX1232 868MHZ 72 $187.5000 In Stock
SX1232-32SKA915 KIT EVALUATION SX1232 915MHZ 73 $187.5000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SX1232IMLTRT Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type TxRx Only
RF Family/Standard General ISM < 1GHz
Protocol -
Modulation FSK, GFSK, GMSK, MSK, OOK
Frequency 862Mhz ~ 1.02GHz
Data Rate (Max) 300kbps
Power - Output 20dBm
Sensitivity -123dBm
Memory Size -
Serial Interfaces SPI
GPIO 6
Voltage - Supply 1.8V ~ 3.7V
Current - Receiving 9.3mA
Current - Transmitting 18mA ~ 125mA
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 24-VQFN Exposed Pad
Supplier Device Package 24-QFN (5x5)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SX1235IMLTRT IC RF TXRX ISM&lt;1GHZ 24VQFN 3,104 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Semtech Parts in Stock

Request a Quote

Need SX1232IMLTRT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.