CC1350F128RHBR Texas Instruments component image

CC1350F128RHBR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC RF TXRX+MCU 802.15.4 32VFQFN

Listed in RF Transceiver ICs

728 pcs in stock ships same day before 6pm

from $3.6698

Quantity Unit Price
1 - 2,999 $7.1800
3,000+ $3.6698 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CC1350F128RHBR?

CC1350F128RHBR is a ic rf txrx+mcu 802.15.4 32vfqfn, featuring a frequency of 287MHz ~ 351MHz, 359MHz ~ 527MHz, 718MHz ~ 1.05GHz, 2.15GHz ~ 2.64GHz, the 32-VFQFN Exposed Pad case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
LAUNCHXL-CC1350-4 LAUNCHPAD APPLICATION 188 $34.8000 In Stock
LAUNCHXL-CC1350US EVAL BOARD FOR CC1350 178 $34.8000 In Stock
CC1350F128RSMT IC RF TXRX+MCU BLE 4.2 32VQFN 647 $8.3700 In Stock
CC1350F128RSMR IC RF TXRX+MCU BLUETOOTH 32VFQFN 652 $8.1300 In Stock
CC1350F128RGZT IC RF TXRX+MCU BLUETOOTH 48VFQFN 614 $8.6000 In Stock
CC1350F128RGZR IC RF TXRX+MCU BLE 4.2 48VQFN 647 $8.3600 In Stock
CC1350F128RHBT IC RF TXRX+MCU 802.15.4 32VFQFN 663 $8.1400 In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

CC1350F128RHBR Specifications

Series SimpleLink™
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type TxRx + MCU
RF Family/Standard 802.15.4, General ISM < 1GHz
Protocol -
Modulation GFSK
Frequency 287MHz ~ 351MHz, 359MHz ~ 527MHz, 718MHz ~ 1.05GHz, 2.15GHz ~ 2.64GHz
Data Rate (Max) 50kbps
Power - Output 14dBm
Sensitivity -110dBm
Memory Size 128kB Flash, 28kB SRAM
Serial Interfaces I²C, I²S, SPI, UART
GPIO 15
Voltage - Supply 1.8V ~ 3.8V
Current - Receiving 5.4mA
Current - Transmitting 10.5mA
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 32-VFQFN Exposed Pad
Supplier Device Package 32-VQFN (5x5)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CC1310F128RSMT IC RF TXRX+MCU ISM&lt;1GHZ 32VFQFN 836 $6.3500 70%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need CC1350F128RHBR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.