SBCH433RJ TE Connectivity AMP Connectors component image

SBCH433RJ

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES 33.0 OHM 4W 5% AXIAL

Listed in Through Hole Resistors

4,416 pcs in stock ships same day before 6pm

from $0.4164

Quantity Unit Price
1 - 9 $1.1400
10 - 24 $1.0123
25 - 49 $0.9310
50 - 99 $0.8491
100 - 249 $0.7349
250 - 499 $0.6205
500 - 999 $0.5226
1,000 - 4,999 $0.4344
5,000+ $0.4164 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SBCH433RJ?

SBCH433RJ is a res 33.0 ohm 4w 5% axial, featuring a power rating of 4W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
6111-EP-252E MOUNTING HARDWARE FOR 280W 273 $22.3800 In Stock
SBCHE61K0J RES 1.00K OHM 7W 5% AXIAL 5,660 $0.8900 In Stock
SBCHE612RJ RES 12.0 OHM 7W 5% AXIAL 5,647 $0.8900 In Stock
SBCHE468RJ RES 68.0 OHM 4W 5% AXIAL 5,986 $0.8400 In Stock
SBC43K3J RES 3.30K OHM 5W 5% AXIAL 3,883 $1.3000 In Stock
SBCV63R9K RES 3.90 OHM 7W 10% RADIAL 3,031 $1.6700 In Stock
SBCHE63R3K RES 3.30 OHM 7W 10% AXIAL 4,948 $1.0200 In Stock
SBCH4470RJ RES 470 OHM 4W 5% AXIAL 4,418 $1.1400 In Stock
SBCHE433RJ RES 33.0 OHM 4W 5% AXIAL 5,987 $0.8400 In Stock
SBCHE510KJ RES 10.0K OHM 5W 5% AXIAL 5,313 $0.9500 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SBCH433RJ Specifications

Series SBC, CGS
Package Bulk
Part Status Active
Resistance 33 Ohms
Tolerance ±5%
Power (Watts) 4W
Composition Wirewound
Features Flame Proof, Safety
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 350°C
Package / Case Axial
Supplier Device Package -
Size / Dimension 0.315" x 0.276" Rectangular x 0.787" L (8.00mm x 7.00mm x 20.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CB5JB33R0 RES 33 OHM 5W 5% CERAMIC WW 60,638 $0.0825 89%
WS5A33R0J RES 33 OHM 5W 5% AXIAL 1,595 RFQ 89%
WS3A33R0J RES 33 OHM 3W 5% AXIAL 2,560 RFQ 86%
C3A33RJT RES 33.0 OHM 3W 5% AXIAL 13,042 $0.3845 86%
CB7JB33R0 RES 33 OHM 7W 5% CERAMIC WW 37,346 $0.1340 73%
WS7M33R0J RES 33 OHM 7W 5% AXIAL 4,809 RFQ 73%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need SBCH433RJ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.