CB7JB33R0 Stackpole Electronics, Inc. component image

CB7JB33R0

In Stock

Stackpole Electronics, Inc. logo Stackpole Electronics, Inc. · franchised distributor

RES 33 OHM 7W 5% CERAMIC WW

Listed in Through Hole Resistors

37,346 pcs in stock ships same day before 6pm

from $0.1181

Quantity Unit Price
1 - 1,999 $0.1340
2,000+ $0.1181 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CB7JB33R0?

CB7JB33R0 is a res 33 ohm 7w 5% ceramic ww, featuring a power rating of 7W, a tolerance of ±5%, a Wirewound composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Stackpole Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CB15JB110R RES 110 OHM 15W 5% CERAMIC WW 18,473 $0.2713 In Stock
CB5JBR250 RES 0.25 OHM 5W 5% CERAMIC WW 56,856 $0.0880 In Stock
CB7JB12R0 RES 12 OHM 7W 5% CERAMIC WW 37,347 $0.1340 In Stock
CB15JB18R0 RES 18 OHM 15W 5% CERAMIC WW 18,463 $0.2713 In Stock
CB15JB91R0 RES 91 OHM 15W 5% CERAMIC WW 18,460 $0.2713 In Stock
CB2JB30R0 RES 30 OHM 2W 5% CERAMIC WW 66,704 $0.0750 In Stock
CB2JB3R00 RES 3 OHM 2W 5% CERAMIC WW 66,708 $0.0750 In Stock
CB10JB120R RES 120 OHM 10W 5% CERAMIC WW 28,953 $0.1729 In Stock
CB10JBR300 RES 0.3 OHM 10W 5% CERAMIC WW 28,949 $0.1729 In Stock
CB5JB5R10 RES 5.1 OHM 5W 5% CERAMIC WW 10,030 $0.5000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CB7JB33R0 Specifications

Series CB
Package Bulk
Part Status Active
Resistance 33 Ohms
Tolerance ±5%
Power (Watts) 7W
Composition Wirewound
Features Flame Proof, Moisture Resistant, Safety
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.374" Square x 1.378" L (9.50mm x 35.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
WS7M33R0J RES 33 OHM 7W 5% AXIAL 4,809 RFQ 100%
WS7A33R0J RES 33 OHM 7W 5% AXIAL 1,217 RFQ 100%
CB5JB33R0 RES 33 OHM 5W 5% CERAMIC WW 60,638 $0.0825 84%
WS5A33R0J RES 33 OHM 5W 5% AXIAL 1,595 RFQ 84%
SBCH433RJ RES 33.0 OHM 4W 5% AXIAL 4,416 $1.1400 73%
FW20A33R0JA RES 33 OHM 2W 5% AXIAL 38,856 $0.1288 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Stackpole Electronics, Inc. Parts in Stock

Request a Quote

Need CB7JB33R0 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.