RW5S0FA1R00FE Ohmite component image

RW5S0FA1R00FE

In Stock

Ohmite logo Ohmite · franchised distributor

RES SMD 1 OHM 1% 5W L BEND

Listed in Chip Resistor - Surface Mount

3,148 pcs in stock ships same day before 6pm

from $0.6552

Quantity Unit Price
1 - 9 $1.6100
10 - 24 $1.4300
25 - 49 $1.3260
50 - 99 $1.2480
100 - 249 $1.0920
250 - 499 $0.9360
500 - 999 $0.7800
1,000 - 4,999 $0.6760
5,000+ $0.6552 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RW5S0FA1R00FE?

RW5S0FA1R00FE is a res smd 1 ohm 1% 5w l bend, featuring a power rating of 5W, a tolerance of ±1%, a Wirewound composition, and the SMD, L-Bend case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Ohmite Series Variants in Stock

18 variants of this series in stock
Part Number Description Stock Unit Price Status
RW5S0FAR100FET RES SMD 100M OHM 1% 5W L BEND 6,219 $0.8100 In Stock
RW5S0FA100RJE RES SMD 100 OHM 5% 5W L BEND 3,146 $1.6100 In Stock
RW5S0FAR100FE RES 0.1 OHM 1% 5W L BEND 3,137 $1.6100 In Stock
RW5S0FA10K0JET RES SMD 10K OHM 5% 5W L BEND 5,389 $0.9360 In Stock
RW5S0FA4K70JE RES SMD 4.7K OHM 5% 5W L BEND 3,144 $1.6100 In Stock
RW5S0FA1R00FET RES SMD 1 OHM 1% 5W L BEND 5,378 $0.9360 In Stock
RW5S0FA20R0JE RES SMD 20 OHM 5% 5W L BEND 3,150 $1.6100 In Stock
RW5S0FA20R0JET RES SMD 20 OHM 5% 5W L BEND 5,371 $0.9360 In Stock
RW5S0FA10R0JE RES SMD 10 OHM 5% 5W L BEND 3,148 $1.6100 In Stock
RW5S0FA10R0JET RES SMD 10 OHM 5% 5W L BEND 6,542 $0.7700 In Stock
+ 8 more variants in stock — browse the full category

Technical Parameters

RW5S0FA1R00FE Specifications

Series RW
Package Bulk
Part Status Active
Resistance 1 Ohms
Tolerance ±1%
Power (Watts) 5W
Composition Wirewound
Features -
Temperature Coefficient ±50ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case SMD, L-Bend
Supplier Device Package -
Ratings -
Size / Dimension 0.806" L x 0.365" W (20.47mm x 9.27mm)
Height - Seated (Max) 0.406" (10.31mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RW5S0FA1R00FET RES SMD 1 OHM 1% 5W L BEND 5,378 $0.9360 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need RW5S0FA1R00FE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.