RW5S0FAR100FE Ohmite component image

RW5S0FAR100FE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 0.1 OHM 1% 5W L BEND

Listed in Chip Resistor - Surface Mount

3,137 pcs in stock ships same day before 6pm

from $0.6552

Quantity Unit Price
1 - 9 $1.6100
10 - 24 $1.4300
25 - 49 $1.3260
50 - 99 $1.2480
100 - 249 $1.0920
250 - 499 $0.9360
500 - 999 $0.7800
1,000 - 4,999 $0.6760
5,000+ $0.6552 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RW5S0FAR100FE?

RW5S0FAR100FE is a res 0.1 ohm 1% 5w l bend, featuring a power rating of 5W, a tolerance of ±1%, a Wirewound composition, and the SMD, L-Bend case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

18 variants of this series in stock
Part Number Description Stock Unit Price Status
RW5S0FAR100FET RES SMD 100M OHM 1% 5W L BEND 6,219 $0.8100 In Stock
RW5S0FA100RJE RES SMD 100 OHM 5% 5W L BEND 3,146 $1.6100 In Stock
RW5S0FA10K0JET RES SMD 10K OHM 5% 5W L BEND 5,389 $0.9360 In Stock
RW5S0FA4K70JE RES SMD 4.7K OHM 5% 5W L BEND 3,144 $1.6100 In Stock
RW5S0FA1R00FET RES SMD 1 OHM 1% 5W L BEND 5,378 $0.9360 In Stock
RW5S0FA20R0JE RES SMD 20 OHM 5% 5W L BEND 3,150 $1.6100 In Stock
RW5S0FA20R0JET RES SMD 20 OHM 5% 5W L BEND 5,371 $0.9360 In Stock
RW5S0FA10R0JE RES SMD 10 OHM 5% 5W L BEND 3,148 $1.6100 In Stock
RW5S0FA10R0JET RES SMD 10 OHM 5% 5W L BEND 6,542 $0.7700 In Stock
RW5S0FA1K00JET RES SMD 1K OHM 5% 5W L BEND 5,378 $0.9360 In Stock
+ 8 more variants in stock — browse the full category

Technical Parameters

RW5S0FAR100FE Specifications

Series RW
Package Bulk
Part Status Active
Resistance 100 mOhms
Tolerance ±1%
Power (Watts) 5W
Composition Wirewound
Features -
Temperature Coefficient ±90ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case SMD, L-Bend
Supplier Device Package -
Ratings -
Size / Dimension 0.806" L x 0.365" W (20.47mm x 9.27mm)
Height - Seated (Max) 0.406" (10.31mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RW5S0FAR100FET RES SMD 100M OHM 1% 5W L BEND 6,219 $0.8100 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need RW5S0FAR100FE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.