RW1S0BA150RFE Ohmite component image

RW1S0BA150RFE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 150 OHM 1% 1W 2515

Listed in Chip Resistor - Surface Mount

3,093 pcs in stock ships same day before 6pm

from $1.6354

Quantity Unit Price
1+ $1.6354 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RW1S0BA150RFE?

RW1S0BA150RFE is a res 150 ohm 1% 1w 2515, featuring a power rating of 1W, a tolerance of ±1%, a Wirewound composition, and the 2515 J-Lead case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
RW3R5EA4R00FE RES 4 OHM 1% 3W 8127 3,503 $1.4447 In Stock
RW1S0BAR500JE RES 500M OHM 5% 1W 2515 5,738 $0.8789 In Stock
RP2S0DA6K20J RES 6.2K OHM 5% 2W 4527 5,137 $0.9805 In Stock
RW1S0BA47R0J RES 47 OHM 5% 1W 2515 5,121 $0.9843 In Stock
RW2S0CB2R00JE RES 2 OHM 5% 2W 4122 4,029 $1.2533 In Stock
RW1S0BA1K00F RES 1K OHM 1% 1W 2515 5,164 $0.9759 In Stock
RW2S0CB100RJE RES 100 OHM 5% 2W 4122 4,022 $1.2541 In Stock
RW3R0DBR499F RES 499M OHM 1% 3W 6327 3,534 $1.4285 In Stock
RW1S0BA34R8J RES 34.8 OHM 5% 1W 2515 4,567 $1.1033 In Stock
RW2R0CB100RJE RES 100 OHM 5% 2W 4122 4,015 $1.2580 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

RW1S0BA150RFE Specifications

Series RW
Package Bulk
Part Status Active
Resistance 150 Ohms
Tolerance ±1%
Power (Watts) 1W
Composition Wirewound
Features -
Temperature Coefficient ±90ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case 2515 J-Lead
Supplier Device Package 2515
Ratings -
Size / Dimension 0.246" L x 0.136" W (6.25mm x 3.45mm)
Height - Seated (Max) 0.141" (3.58mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RW1S0BA150RFT RES 150 OHM 1% 1W 2515 5,088 $0.9918 100%
RW1S0BA150RFET RES 150 OHM 1% 1W 2515 5,690 $0.8862 100%
RW1S0BA150RF RES 150 OHM 1% 1W 2515 3,093 $1.6355 100%
RW1S0BA100RF RES 100 OHM 1% 1W 2515 3,639 $1.3929 76%
RW1S0BA200RJE RES 200 OHM 5% 1W 2515 4,726 $1.0678 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need RW1S0BA150RFE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.