RW2R0CB100RJE Ohmite component image

RW2R0CB100RJE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 100 OHM 5% 2W 4122

Listed in Chip Resistor - Surface Mount

4,015 pcs in stock ships same day before 6pm

from $1.2580

Quantity Unit Price
1+ $1.2580 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RW2R0CB100RJE?

RW2R0CB100RJE is a res 100 ohm 5% 2w 4122, featuring a power rating of 2W, a tolerance of ±5%, a Wirewound composition, and the 4122 J-Lead case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
RW3R5EA4R00FE RES 4 OHM 1% 3W 8127 3,503 $1.4447 In Stock
RW1S0BAR500JE RES 500M OHM 5% 1W 2515 5,738 $0.8789 In Stock
RP2S0DA6K20J RES 6.2K OHM 5% 2W 4527 5,137 $0.9805 In Stock
RW1S0BA47R0J RES 47 OHM 5% 1W 2515 5,121 $0.9843 In Stock
RW2S0CB2R00JE RES 2 OHM 5% 2W 4122 4,029 $1.2533 In Stock
RW1S0BA1K00F RES 1K OHM 1% 1W 2515 5,164 $0.9759 In Stock
RW2S0CB100RJE RES 100 OHM 5% 2W 4122 4,022 $1.2541 In Stock
RW3R0DBR499F RES 499M OHM 1% 3W 6327 3,534 $1.4285 In Stock
RW1S0BA34R8J RES 34.8 OHM 5% 1W 2515 4,567 $1.1033 In Stock
RW1S0BA40R2F RES 40.2 OHM 1% 1W 2515 5,289 $0.9540 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

RW2R0CB100RJE Specifications

Series RW
Package Bulk
Part Status Active
Resistance 100 Ohms
Tolerance ±5%
Power (Watts) 2W
Composition Wirewound
Features -
Temperature Coefficient ±20ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case 4122 J-Lead
Supplier Device Package 4122
Ratings -
Size / Dimension 0.407" L x 0.226" W (10.34mm x 5.74mm)
Height - Seated (Max) 0.227" (5.77mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RW2S0CB100RJE RES 100 OHM 5% 2W 4122 4,022 $1.2541 100%
RW2R0CB82R5F RES 82.5 OHM 1% 2W 4122 4,007 $1.2584 63%
RW2S0CB200RJ RES 200 OHM 5% 2W 4122 3,565 $1.4158 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need RW2R0CB100RJE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.