PWR6327W32R4F J.W. Miller / Bourns component image

PWR6327W32R4F

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES SMD 32.4 OHM 1% 3W 6327

Listed in Chip Resistor - Surface Mount

3,603 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PWR6327W32R4F?

PWR6327W32R4F is a res smd 32.4 ohm 1% 3w 6327, featuring a power rating of 3W, a tolerance of ±1%, a Wirewound composition, and the 6327 J-Lead case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
PWR1913WR027JE RES 0.027 OHM 5% 1/2W 1913 4,918 RFQ In Stock
PWR6327WR360JE RES 0.36 OHM 5% 3W 6327 4,794 RFQ In Stock
PWR1913WR030J RES 0.03 OHM 5% 1/2W 1913 2,868 RFQ In Stock
PWR1913WR100F RES 0.1 OHM 1% 1/2W 1913 4,557 RFQ In Stock
PWR1913WR100FE RES 0.1 OHM 1% 1/2W 1913 3,387 RFQ In Stock
PWR1913WR010J RES 0.01 OHM 5% 1/2W 1913 1,308 RFQ In Stock
PWR6327NR010FE RES 0.01 OHM 1% 3W 6327 3,124 RFQ In Stock
PWR6327WR150J RES 0.15 OHM 5% 3W 6327 4,262 RFQ In Stock
PWR6327W6801JE RES SMD 6.8K OHM 5% 3W 6327 606 RFQ In Stock
PWR1913WR249JE RES 0.249 OHM 5% 1/2W 1913 2,804 RFQ In Stock
More variants of this series in stock — browse the full category

Technical Parameters

PWR6327W32R4F Specifications

Series PWR6327
Package Bulk
Part Status Obsolete
Resistance 32.4 Ohms
Tolerance ±1%
Power (Watts) 3W
Composition Wirewound
Features Current Sense, Moisture Resistant, Non-Inductive, Pulse Withstanding
Temperature Coefficient ±20ppm/°C
Operating Temperature -55°C ~ 275°C
Package / Case 6327 J-Lead
Supplier Device Package -
Ratings -
Size / Dimension 0.626" L x 0.272" W (15.90mm x 6.90mm)
Height - Seated (Max) 0.268" (6.80mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
S3-47RF1 RES SMD 47 OHM 1% 3W 6327 3,459 $1.4600 78%
S3-22R1F8 RES SMD 22.1 OHM 1% 3W 6327 4,665 $1.0815 77%
S3-47RJ1 RES SMD 47 OHM 5% 3W 6327 7,757 $0.6480 53%
S3-22RJ1 RES SMD 22 OHM 5% 3W 6327 7,748 $0.6480 52%
PWR6327W22R0FE RES SMD 22 OHM 1% 3W 6327 2,493 RFQ 77%
PWR6327W33R0J RES SMD 33 OHM 5% 3W 6327 1,415 RFQ 74%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need PWR6327W32R4F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.