PWR4525W2000F J.W. Miller / Bourns component image

PWR4525W2000F

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES SMD 200 OHM 1% 2W 4525

Listed in Chip Resistor - Surface Mount

6,560 pcs in stock ships same day before 6pm

from $0.7680

Quantity Unit Price
1 - 499 $0.7680 BEST
500+ $0.7680 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PWR4525W2000F?

PWR4525W2000F is a res smd 200 ohm 1% 2w 4525, featuring a power rating of 2W, a tolerance of ±1%, a Wirewound composition, and the 4525 J-Lead case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
PWR4525W6R00FE RES SMD 6 OHM 1% 2W 4525 7,874 $0.6384 In Stock
PWR2615WR030JE RES 0.03 OHM 5% 1W 2615 7,560 $0.6650 In Stock
PWR2615WR249J RES 0.249 OHM 5% 1W 2615 6,711 $0.7500 In Stock
PWR2615WR050JE RES 0.05 OHM 5% 1W 2615 7,549 $0.6650 In Stock
PWR4525WR680JE RES 0.68 OHM 5% 2W 4525 7,560 $0.6650 In Stock
PWR4525WR050J RES 0.05 OHM 5% 2W 4525 6,708 $0.7500 In Stock
PWR4525W4701J RES SMD 4.7K OHM 5% 2W 4525 6,843 $0.7360 In Stock
PWR2615W1001FE RES 1K OHM 1% 1W 2615 7,862 $0.6384 In Stock
PWR2615W22R0F RES SMD 22 OHM 1% 1W 2615 6,560 $0.7680 In Stock
PWR2615W33R0FE RES SMD 33 OHM 1% 1W 2615 7,865 $0.6384 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

PWR4525W2000F Specifications

Series PWR4525
Package Bulk
Part Status Active
Resistance 200 Ohms
Tolerance ±1%
Power (Watts) 2W
Composition Wirewound
Features Current Sense, Moisture Resistant, Pulse Withstanding
Temperature Coefficient ±20ppm/°C
Operating Temperature -55°C ~ 275°C
Package / Case 4525 J-Lead
Supplier Device Package -
Ratings -
Size / Dimension 0.449" L x 0.252" W (11.40mm x 6.40mm)
Height - Seated (Max) 0.197" (5.00mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
S4-220RF1 RES SMD 220 OHM 1% 2W 4525 8,337 $0.6023 94%
S4-221RF1 RES SMD 221 OHM 1% 2W 4525 5,018 $1.0044 94%
S4-150RF1 RES SMD 150 OHM 1% 2W 4525 4,541 $1.1100 83%
PWR4525W1350F RES SMD 135 OHM 1% 2W 4525 6,549 $0.7680 76%
PWR4525W200RJ RES SMD 200 OHM 5% 2W 4525 4,154 RFQ 75%
PWR4525W2200J RES SMD 220 OHM 5% 2W 4525 6,842 $0.7360 69%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need PWR4525W2000F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.