PWR263S-35-R330F J.W. Miller / Bourns component image

PWR263S-35-R330F

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES 0.33 OHM 1% 35W D2PAK

Listed in Chip Resistor - Surface Mount

1,707 pcs in stock ships same day before 6pm

from $3.0000

Quantity Unit Price
1 - 299 $3.0000 BEST
300+ $3.0000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PWR263S-35-R330F?

PWR263S-35-R330F is a res 0.33 ohm 1% 35w d2pak, featuring a power rating of 35W, a tolerance of ±1%, a Thick Film composition, and the TO-263-3, D²Pak (2 Leads + Tab), TO-263AB case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
PWR263S-35-1003J RES SMD 100K OHM 5% 35W D2PAK 1,945 $2.6250 In Stock
PWR263S-35-5000JE RES 500 OHM 5% 35W D2PAK 2,192 $2.3275 In Stock
PWR263S-35-3R30F RES SMD 3.3 OHM 1% 35W D2PAK 1,004 $5.2000 In Stock
PWR263S-35-R100F RES 0.1 OHM 1% 35W D2PAK 1,706 $3.0000 In Stock
PWR263S-35-15R0J RES SMD 15 OHM 5% 35W D2PAK 1,129 $4.5500 In Stock
PWR263S-35-3000F RES SMD 300 OHM 1% 35W D2PAK 1,716 $3.0000 In Stock
PWR263S-35-1201JE RES SMD 1.2K OHM 5% 35W D2PAK 2,187 $2.3275 In Stock
PWR263S-35-R250F RES 0.25 OHM 1% 35W D2PAK 1,715 $3.0000 In Stock
PWR263S-35-10R0FE RES SMD 10 OHM 1% 35W D2PAK 1,009 $5.2000 In Stock
PWR263S-35-8R20F RES SMD 8.2 OHM 1% 35W D2PAK 1,003 $5.2000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

PWR263S-35-R330F Specifications

Series PWR263S-35
Package Tube
Part Status Active
Resistance 330 mOhms
Tolerance ±1%
Power (Watts) 35W
Composition Thick Film
Features Automotive AEC-Q200, Current Sense, Pulse Withstanding
Temperature Coefficient ±100ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package D2PAK
Ratings AEC-Q200
Size / Dimension 0.398" L x 0.409" W (10.10mm x 10.40mm)
Height - Seated (Max) 0.177" (4.50mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
PWR263S-35-R300F RES 0.3 OHM 1% 35W D2PAK 1,698 $3.0000 94%
PWR263S-35-R400F RES 0.4 OHM 1% 35W D2PAK 1,704 $3.0000 88%
PWR263S-35-R270FE RES 0.27 OHM 1% 35W D2PAK 1,922 $2.6600 88%
PWR263S-35-R270F RES 0.27 OHM 1% 35W D2PAK 1,002 $5.2000 88%
PWR263S-35-R250F RES 0.25 OHM 1% 35W D2PAK 1,715 $3.0000 83%
PWR263S-35-R500F RES 0.5 OHM 1% 35W D2PAK 1,002 $5.2000 75%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need PWR263S-35-R330F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.