PWR221T-30-R075J J.W. Miller / Bourns component image

PWR221T-30-R075J

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES 0.075 OHM 30W 5% TO220

Listed in Through Hole Resistors

1,742 pcs in stock ships same day before 6pm

from $1.5120

Quantity Unit Price
1 - 299 $2.9250
300+ $1.5120 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PWR221T-30-R075J?

PWR221T-30-R075J is a res 0.075 ohm 30w 5% to220, featuring a power rating of 30W, a tolerance of ±5%, a Thick Film composition, and the TO-220-2 Full Pack case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
PWR221T-30-R050J RES 0.05 OHM 30W 5% TO220 1,035 $5.0700 In Stock
PWR221T-30-5R10J RESISTORS 1,279 $4.0300 In Stock
PWR221T-30-25R0J RES 25 OHM 30W 5% TO220 1,275 $4.0300 In Stock
PWR221T-30-10R0J RES 10 OHM 30W 5% TO220 1,290 $4.0300 In Stock
PWR221T-30-12R0F RES 12 OHM 30W 1% TO220 1,279 $4.0300 In Stock
PWR221T-30-30R0J RES 30 OHM 30W 5% TO220-2 1,283 $4.0300 In Stock
PWR221T-30-4002F RES 40K OHM 30W 1% TO220 1,283 $4.0300 In Stock
PWR221T-30-8R20J RES 8.2 OHM 30W 5% TO220 2,181 $2.3250 In Stock
PWR221T-30-7501J RES 7.5K OHM 30W 5% TO220-2 2,184 $2.3250 In Stock
PWR221T-30-22R0F RES 22 OHM 30W 1% TO220 1,273 $4.0300 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

PWR221T-30-R075J Specifications

Series PWR221T-30
Package Tube
Part Status Active
Resistance 75 mOhms
Tolerance ±5%
Power (Watts) 30W
Composition Thick Film
Features Automotive AEC-Q200, Current Sense, Pulse Withstanding
Temperature Coefficient ±300ppm/°C
Operating Temperature -50°C ~ 150°C
Package / Case TO-220-2 Full Pack
Supplier Device Package TO-220-2
Size / Dimension 0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max) 0.760" (19.30mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
PWR221T-30-R050J RES 0.05 OHM 30W 5% TO220 1,035 $5.0700 76%
PWR221T-50-R050J RES 50 MOHM 50W 5% TO220 890 $5.8500 51%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need PWR221T-30-R075J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.