PWR163S-25-R200F J.W. Miller / Bourns component image

PWR163S-25-R200F

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES 0.2 OHM 1% 25W DPAK

Listed in Chip Resistor - Surface Mount

1,326 pcs in stock ships same day before 6pm

from $1.7955

Quantity Unit Price
1 - 299 $3.9000
300+ $1.7955 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PWR163S-25-R200F?

PWR163S-25-R200F is a res 0.2 ohm 1% 25w dpak, featuring a power rating of 25W, a tolerance of ±1%, a Thick Film composition, and the TO-252-3, DPak (2 Leads + Tab), SC-63 case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
PWR163S-25-30R0J RES SMD 30 OHM 5% 25W DPAK 1,654 $3.0800 In Stock
PWR163S-25-R330FE RES 0.33 OHM 1% 25W DPAK 2,550 $1.9950 In Stock
PWR163S-25-50R0F RES SMD 50 OHM 1% 25W DPAK 1,655 $3.0800 In Stock
PWR163S-25-R500FE RES 0.5 OHM 1% 25W DPAK 1,323 $3.9000 In Stock
PWR163S-25-1R50J RES SMD 1.5 OHM 5% 25W DPAK 1,326 $3.9000 In Stock
PWR163S-25-10R0J RES SMD 10 OHM 5% 25W DPAK 1,653 $3.0800 In Stock
PWR163S-25-5R00J RES SMD 5 OHM 5% 25W DPAK 1,672 $3.0800 In Stock
PWR163S-25-1R30F RES 1.3 OHM 1% 25W D2PAK 2,263 $2.2500 In Stock
PWR163S-25-20R0FE RES 20 OHM 1% 25W D2PAK 4,161 $1.2103 In Stock
PWR163S-25-50R0J RES SMD 50 OHM 5% 25W DPAK 1,663 $3.0800 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

PWR163S-25-R200F Specifications

Series PWR163
Package Tube
Part Status Active
Resistance 200 mOhms
Tolerance ±1%
Power (Watts) 25W
Composition Thick Film
Features Automotive AEC-Q200, Current Sense, Pulse Withstanding
Temperature Coefficient ±100ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package DPAK
Ratings AEC-Q200
Size / Dimension 0.320" L x 0.324" W (8.13mm x 8.22mm)
Height - Seated (Max) 0.125" (3.17mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
PWR163S-25-R200FE RES 0.2 OHM 1% 25W DPAK 1,319 $3.9000 100%
PWR163S-25-R250FE RES 0.25 OHM 1% 25W DPAK 2,548 $1.9950 87%
PWR163S-25-R250F RES 0.25 OHM 1% 25W DPAK 2,881 $1.7600 87%
PWR163S-25-R150FE RES 0.15 OHM 1% 25W DPAK 2,556 $1.9950 83%
PWR163S-25-R300FE RES 0.3 OHM 1% 25W DPAK 2,544 $1.9950 76%
PWR163S-25-R200J RES 0.2 OHM 5% 25W DPAK 2,272 $2.2500 75%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need PWR163S-25-R200F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.