PSR500HTQFD0L30 ROHM Semiconductor component image

PSR500HTQFD0L30

In Stock

ROHM Semiconductor logo ROHM Semiconductor · franchised distributor

RES SMD 300 UOHM 1% 5W 5931

Listed in Chip Resistor - Surface Mount

2,857 pcs in stock ships same day before 6pm

from $0.7032

Quantity Unit Price
1 - 1,999 $1.7800
2,000 - 5,999 $0.7319
6,000 - 9,999 $0.7232
10,000+ $0.7032 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PSR500HTQFD0L30?

PSR500HTQFD0L30 is a res smd 300 uohm 1% 5w 5931, featuring a power rating of 5W, a tolerance of ±1%, a Metal Element composition, and the Nonstandard case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

ROHM Semiconductor Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
PSR400ITQFL3L00 RES 0.003 OHM 1% 4W 3921 3,505 $1.4400 In Stock
PSR400ITQFH1L00 RES 0.001 OHM 1% 4W 3921 3,512 $1.4400 In Stock
PSR500HTQFJ2L00 RES 0.002 OHM 1% 5W 5931 2,845 $1.7800 In Stock
PSR400ITQFD0L30 RES SMD 300 UOHM 1% 4W 3921 3,509 $1.4400 In Stock
PSR500HTQFC0L20 RES SMD 200 UOHM 1% 5W 5931 2,977 $1.7000 In Stock
PSR500HTQFF0L50 RES SMD 500 UOHM 1% 5W 5931 2,853 $1.7800 In Stock
PSR400ITQFF0L50 RES SMD 500 UOHM 1% 4W 3921 3,505 $1.4400 In Stock
PSR400ITQFJ2L00 RES 0.002 OHM 1% 4W 3921 3,514 $1.4400 In Stock
PSR500HTQFE0L40 RES SMD 400 UOHM 1% 5W 5931 2,853 $1.7800 In Stock
PSR500HTQFH1L00 RES 0.001 OHM 1% 5W 5931 2,838 $1.7800 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

PSR500HTQFD0L30 Specifications

Series PSR
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Resistance 300 µOhms
Tolerance ±1%
Power (Watts) 5W
Composition Metal Element
Features Automotive AEC-Q200, Current Sense
Temperature Coefficient ±150ppm/°C
Operating Temperature -55°C ~ 170°C
Package / Case Nonstandard
Supplier Device Package 5931
Ratings AEC-Q200
Size / Dimension 0.591" L x 0.305" W (15.00mm x 7.75mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Same Manufacturer

ROHM Semiconductor Parts in Stock

Request a Quote

Need PSR500HTQFD0L30 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.