OPA347PAG4 Rochester Electronics component image

OPA347PAG4

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

OPA347 MICROPOWER RAIL-TO-RAIL O

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

14,323 pcs in stock ships same day before 6pm

from $0.3500

Quantity Unit Price
1 - 1,149 $0.3500 BEST
1,150+ $0.3500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA347PAG4?

OPA347PAG4 is a opa347 micropower rail-to-rail o, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

2 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA4347EA/2K5 OPA4347 MICROPOWER RAIL-TO-RAIL 3,040 $1.6700 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA347PAG4 Specifications

Series -
Package Bulk
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 0.17V/µs
Gain Bandwidth Product 350 kHz
-3db Bandwidth -
Current - Input Bias 0.5 pA
Voltage - Input Offset 2 mV
Current - Supply 20µA
Current - Output / Channel 17 mA
Voltage - Supply, Single/Dual (±) 2.3V ~ 5.5V, ±1.15V ~ 2.75V
Operating Temperature -55°C ~ 125°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA347PA IC OPAMP GP 1 CIRCUIT 8DIP 5,426 $0.9300 100%
MCP6281-E/P IC OPAMP GP 1 CIRCUIT 8DIP 7,620 $0.6600 98%
MCP6283-E/P IC OPAMP GP 1 CIRCUIT 8DIP 7,281 $0.6900 98%
MCP6285-E/P IC OPAMP GP 2 CIRCUIT 8DIP 7,610 $0.6600 98%
MCP6282-E/P IC OPAMP GP 2 CIRCUIT 8DIP 7,622 $0.6600 98%
MCP6275-E/P IC OPAMP GP 2 CIRCUIT 8DIP 8,977 $0.5600 98%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need OPA347PAG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.