MCP6281-E/P Roving Networks / Microchip Technology component image

MCP6281-E/P

In Stock

Roving Networks / Microchip Technology logo Roving Networks / Microchip Technology · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

7,620 pcs in stock ships same day before 6pm

from $0.4934

Quantity Unit Price
1 - 24 $0.6600
25 - 99 $0.5484
100+ $0.4934 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MCP6281-E/P?

MCP6281-E-P is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Roving Networks / Microchip Technology Series Variants in Stock

33 variants of this series in stock
Part Number Description Stock Unit Price Status
MCP6282-E/P IC OPAMP GP 2 CIRCUIT 8DIP 7,622 $0.6600 In Stock
MCP6282-E/MS IC OPAMP GP 2 CIRCUIT 8MSOP 5,982 $0.8400 In Stock
MCP6281T-E/OTVAO IC OPAMP GP 1 CIRCUIT SOT23-5 10,450 $0.4800 In Stock
MCP6285-E/SN IC OPAMP GP 2 CIRCUIT 8SOIC 7,984 $0.6300 In Stock
MCP6283T-E/SN IC OPAMP GP 1 CIRCUIT 8SOIC 10,034 $0.5000 In Stock
MCP6282T-E/MS IC OPAMP GP 2 CIRCUIT 8MSOP 5,985 $0.8400 In Stock
MCP6284-E/ST IC OPAMP GP 4 CIRCUIT 14TSSOP 3,451 $1.4700 In Stock
MCP6284-E/SLVAO IC OPAMP GP 4 CIRCUIT 14SOIC 2,421 RFQ In Stock
MCP6284T-E/SLVAO IC OPAMP GP 4 CIRCUIT 14SOIC 2,882 RFQ In Stock
MCP6281T-E/MS IC OPAMP GP 1 CIRCUIT 8MSOP 10,686 $0.4700 In Stock
+ 23 more variants in stock — browse the full category

Technical Parameters

MCP6281-E/P Specifications

Series -
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 2.5V/µs
Gain Bandwidth Product 5 MHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 3 mV
Current - Supply 450µA
Current - Output / Channel 25 mA
Voltage - Supply, Single/Dual (±) 2.2V ~ 6V
Operating Temperature -40°C ~ 125°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MCP6283-E/P IC OPAMP GP 1 CIRCUIT 8DIP 7,281 $0.6900 100%
OPA347PA IC OPAMP GP 1 CIRCUIT 8DIP 5,426 $0.9300 98%
OPA347PAG4 OPA347 MICROPOWER RAIL-TO-RAIL O 14,323 $0.3500 98%
MCP6295-E/P IC OPAMP GP 2 CIRCUIT 8DIP 6,794 $0.7400 96%
MCP6285-E/P IC OPAMP GP 2 CIRCUIT 8DIP 7,610 $0.6600 96%
MCP6293-E/P IC OPAMP GP 1 CIRCUIT 8DIP 6,455 $0.7800 96%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Roving Networks / Microchip Technology Parts in Stock

Request a Quote

Need MCP6281-E/P or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.