OP20GP Rochester Electronics component image

OP20GP

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

DUAL LOW OFFSET LOW POWER OP AMP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,476 pcs in stock ships same day before 6pm

from $2.0600

Quantity Unit Price
1+ $2.0600 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OP20GP?

OP20GP is a dual low offset low power op amp, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

4 variants of this series in stock
Part Number Description Stock Unit Price Status
OP20HJ DUAL LOW OFFSET LOW POWER OP AMP 4,071 $1.2400 In Stock
OP20GJ DUAL LOW OFFSET LOW POWER OP AMP 2,521 $2.0100 In Stock
OP20BJ DUAL LOW OFFSET LOW POWER OP AMP 1,312 $3.9600 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OP20GP Specifications

Series -
Package Bulk
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 0.05V/µs
Gain Bandwidth Product 100 kHz
-3db Bandwidth -
Current - Input Bias 14 nA
Voltage - Input Offset 150 µV
Current - Supply 57µA
Current - Output / Channel -
Voltage - Supply, Single/Dual (±) 5V ~ 30V, ±2.5V ~ 15V
Operating Temperature -25°C ~ 85°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OP113FP LOW NOISE, LOW DRIFT OP AMP 3,157 $1.6000 98%
TLE2021CP IC OPAMP GP 1 CIRCUIT 8DIP 3,048 $1.6600 97%
TLE2021CPG4 IC OPAMP GP 1 CIRCUIT 8DIP 5,097 $0.9869 97%
TLE2021MP OPERATIONAL AMPLIFIER 2,135 $2.3800 97%
TLE2022CPG4 IC OPAMP GP 2 CIRCUIT 8DIP 1,414 $3.6441 97%
TLE2022IPG4 IC OPAMP GP 2 CIRCUIT 8DIP 1,389 $3.7309 97%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need OP20GP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.