OP113FP Rochester Electronics component image

OP113FP

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

LOW NOISE, LOW DRIFT OP AMP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

3,157 pcs in stock ships same day before 6pm

from $1.6000

Quantity Unit Price
1+ $1.6000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OP113FP?

OP113FP is a low noise, low drift op amp, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Rochester Electronics Series Variants in Stock

2 variants of this series in stock
Part Number Description Stock Unit Price Status
OP213EP DUAL LOW NOISE/DRIFT OP AMP 790 $6.6200 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OP113FP Specifications

Series -
Package Bulk
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 1.2V/µs
Gain Bandwidth Product 3.4 MHz
-3db Bandwidth -
Current - Input Bias 600 nA
Voltage - Input Offset 150 µV
Current - Supply -
Current - Output / Channel 40 mA
Voltage - Supply, Single/Dual (±) 4V ~ 36V, ±2V ~ 18V
Operating Temperature -40°C ~ 85°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OP20GP DUAL LOW OFFSET LOW POWER OP AMP 2,476 $2.0600 98%
TLE2021CP IC OPAMP GP 1 CIRCUIT 8DIP 3,048 $1.6600 95%
TLE2021CPG4 IC OPAMP GP 1 CIRCUIT 8DIP 5,097 $0.9869 95%
TLE2021MP OPERATIONAL AMPLIFIER 2,135 $2.3800 95%
TLE2022CPG4 IC OPAMP GP 2 CIRCUIT 8DIP 1,414 $3.6441 95%
INA126PA IC INST AMP 1 CIRCUIT 8DIP 1,527 $3.3400 82%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need OP113FP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.