MP2060-75.0-1% Caddock Electronics, Inc. component image

MP2060-75.0-1%

In Stock

Caddock Electronics, Inc. logo Caddock Electronics, Inc. · franchised distributor

RES 75 OHM 60W 1% TO220

Listed in Through Hole Resistors

799 pcs in stock ships same day before 6pm

from $6.1533

Quantity Unit Price
1 - 49 $6.6378
50+ $6.1533 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MP2060-75.0-1%?

MP2060-75-0-1 is a res 75 ohm 60w 1% to220, featuring a power rating of 60W, a tolerance of ±1%, a Thick Film composition, and the TO-220-2 Full Pack case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Caddock Electronics, Inc. Series Variants in Stock

19 variants of this series in stock
Part Number Description Stock Unit Price Status
MP2060-1.00K-1% RES 1K OHM 60W 1% TO220 642 $8.2400 In Stock
MP2060-50.0-1% RES 50 OHM 60W 1% TO220 612 $8.6100 In Stock
MP2060-100-1% RES 100 OHM 60W 1% TO220 630 $8.6100 In Stock
MP2060-500-1% RES 500 OHM 60W 1% TO220 617 $8.6100 In Stock
MP2060-0.010-2% RES 0.01 OHM 36W 2% TO220 396 $13.7700 In Stock
MP2060-2.00-1% RES 2 OHM 60W 1% TO220 516 $10.4300 In Stock
MP2060-0.020-1% RES 0.02 OHM 60W 1% TO220 409 $13.7700 In Stock
MP2060-0.20-1% RES 0.2 OHM 60W 1% TO220 449 $12.2800 In Stock
MP2060-10.0-1% RES 10 OHM 60W 1% TO220 621 $8.6100 In Stock
MP2060-0.50-1% RES 0.5 OHM 60W 1% TO220 443 $12.2800 In Stock
+ 9 more variants in stock — browse the full category

Technical Parameters

MP2060-75.0-1% Specifications

Series Kool-Pak®MP2060
Package Tube
Part Status Active
Resistance 75 Ohms
Tolerance ±1%
Power (Watts) 60W
Composition Thick Film
Features Current Sense, Moisture Resistant, Non-Inductive, Pulse Withstanding
Temperature Coefficient -20/ +80ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-220-2 Full Pack
Supplier Device Package TO-220
Size / Dimension 0.410" L x 0.175" W (10.41mm x 4.45mm)
Height - Seated (Max) 0.650" (16.52mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MP2060-100-1% RES 100 OHM 60W 1% TO220 630 $8.6100 83%
MP2060-50.0-1% RES 50 OHM 60W 1% TO220 612 $8.6100 76%
MP930-75.0-1% RES 75 OHM 30W 1% TO220 947 $5.5000 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Caddock Electronics, Inc. Parts in Stock

Request a Quote

Need MP2060-75.0-1% or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.