MP2060-100-1% Caddock Electronics, Inc. component image

MP2060-100-1%

In Stock

Caddock Electronics, Inc. logo Caddock Electronics, Inc. · franchised distributor

RES 100 OHM 60W 1% TO220

Listed in Through Hole Resistors

630 pcs in stock ships same day before 6pm

from $4.6440

Quantity Unit Price
1 - 49 $8.6100
50 - 99 $6.6331
100 - 999 $5.7367
1,000+ $4.6440 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MP2060-100-1%?

MP2060-100-1 is a res 100 ohm 60w 1% to220, featuring a power rating of 60W, a tolerance of ±1%, a Thick Film composition, and the TO-220-2 Full Pack case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Caddock Electronics, Inc. Series Variants in Stock

19 variants of this series in stock
Part Number Description Stock Unit Price Status
MP2060-1.00K-1% RES 1K OHM 60W 1% TO220 642 $8.2400 In Stock
MP2060-50.0-1% RES 50 OHM 60W 1% TO220 612 $8.6100 In Stock
MP2060-500-1% RES 500 OHM 60W 1% TO220 617 $8.6100 In Stock
MP2060-0.010-2% RES 0.01 OHM 36W 2% TO220 396 $13.7700 In Stock
MP2060-2.00-1% RES 2 OHM 60W 1% TO220 516 $10.4300 In Stock
MP2060-0.020-1% RES 0.02 OHM 60W 1% TO220 409 $13.7700 In Stock
MP2060-0.20-1% RES 0.2 OHM 60W 1% TO220 449 $12.2800 In Stock
MP2060-10.0-1% RES 10 OHM 60W 1% TO220 621 $8.6100 In Stock
MP2060-0.50-1% RES 0.5 OHM 60W 1% TO220 443 $12.2800 In Stock
MP2060-0.005-5% RES 0.005 OHM 18W 5% TO220 419 $13.5400 In Stock
+ 9 more variants in stock — browse the full category

Technical Parameters

MP2060-100-1% Specifications

Series Kool-Pak®MP2060
Package Tube
Part Status Active
Resistance 100 Ohms
Tolerance ±1%
Power (Watts) 60W
Composition Thick Film
Features Current Sense, Moisture Resistant, Non-Inductive, Pulse Withstanding
Temperature Coefficient -20/ +80ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-220-2 Full Pack
Supplier Device Package TO-220
Size / Dimension 0.410" L x 0.175" W (10.41mm x 4.45mm)
Height - Seated (Max) 0.650" (16.52mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MP2060-75.0-1% RES 75 OHM 60W 1% TO220 799 $6.6378 83%
MP930-100-1% RES 100 OHM 30W 1% TO220 947 $5.5000 67%
MP2060-50.0-1% RES 50 OHM 60W 1% TO220 612 $8.6100 58%
MP2060-200-1% RES 200 OHM 60W 1% TO220 615 $8.6100 58%
MP930-120-1% RES 120 OHM 30W 1% TO220 940 $5.5000 56%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Caddock Electronics, Inc. Parts in Stock

Request a Quote

Need MP2060-100-1% or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.