MF1S5030DA4,118 NXP Semiconductors component image

MF1S5030DA4,118

In Stock

NXP Semiconductors logo NXP Semiconductors · franchised distributor

IC RFID TRANSP 13.56MHZ PLLMC

Listed in RFID, RF Access, Monitoring ICs

2,831 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MF1S5030DA4,118?

MF1S5030DA4-118 is a ic rfid transp 13.56mhz pllmc, featuring a frequency of 13.56MHz, the MOA4, Smart Card Module case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

NXP Semiconductors Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
MF1S5000XDA4/V1J IC RFID TRANSP 13.56MHZ PLLMC 4,782 $1.0555 In Stock
MF1S5030XDA4/V1J IC RFID TRANSP 13.56MHZ PLLMC 3,969 $1.2700 In Stock
MF1S7000XDA4/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,595 $1.9630 In Stock
MF1S7030XDA4/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,418 $2.1100 In Stock
MF1S5030XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 4,143 $1.2200 In Stock
MF1S5030DA8,118 IC RFID TRANSP 13.56MHZ PLLMC 2,172 RFQ In Stock
MF1S7030XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,641 $1.9256 In Stock
MF1S5000XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 4,952 $1.0186 In Stock
MF1S7000XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,637 $1.9256 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MF1S5030DA4,118 Specifications

Series MIFARE®
Package Tape & Reel (TR)
Part Status Obsolete
Type RFID Transponder
Frequency 13.56MHz
Standards ISO 14443, MIFARE
Interface -
Voltage - Supply -
Operating Temperature -25°C ~ 70°C (TA)
Mounting Type Surface Mount
Package / Case MOA4, Smart Card Module
Supplier Device Package PLLMC

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

NXP Semiconductors Parts in Stock

Request a Quote

Need MF1S5030DA4,118 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.