MF1S5000XDA4/V1J NXP Semiconductors component image

MF1S5000XDA4/V1J

In Stock

NXP Semiconductors logo NXP Semiconductors · franchised distributor

IC RFID TRANSP 13.56MHZ PLLMC

Listed in RFID, RF Access, Monitoring ICs

4,782 pcs in stock ships same day before 6pm

from $0.5105

Quantity Unit Price
1 - 17,499 $1.0555
17,500+ $0.5105 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MF1S5000XDA4/V1J?

MF1S5000XDA4-V1J is a ic rfid transp 13.56mhz pllmc, featuring a frequency of 13.56MHz, the MOA4, Smart Card Module case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NXP Semiconductors Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
MF1S5030DA4,118 IC RFID TRANSP 13.56MHZ PLLMC 2,831 RFQ In Stock
MF1S5030XDA4/V1J IC RFID TRANSP 13.56MHZ PLLMC 3,969 $1.2700 In Stock
MF1S7000XDA4/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,595 $1.9630 In Stock
MF1S7030XDA4/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,418 $2.1100 In Stock
MF1S5030XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 4,143 $1.2200 In Stock
MF1S5030DA8,118 IC RFID TRANSP 13.56MHZ PLLMC 2,172 RFQ In Stock
MF1S7030XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,641 $1.9256 In Stock
MF1S5000XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 4,952 $1.0186 In Stock
MF1S7000XDA8/V1J IC RFID TRANSP 13.56MHZ PLLMC 2,637 $1.9256 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MF1S5000XDA4/V1J Specifications

Series MIFARE®
Package Tape & Reel (TR)
Part Status Not For New Designs
Type RFID Transponder
Frequency 13.56MHz
Standards ISO 14443, MIFARE
Interface UART
Voltage - Supply -
Operating Temperature -25°C ~ 70°C
Mounting Type Surface Mount
Package / Case MOA4, Smart Card Module
Supplier Device Package PLLMC

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

NXP Semiconductors Parts in Stock

Request a Quote

Need MF1S5000XDA4/V1J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.