MCR18ERTF5111 ROHM Semiconductor component image

MCR18ERTF5111

In Stock

ROHM Semiconductor logo ROHM Semiconductor · franchised distributor

RES SMD 5.11K OHM 1% 1/4W 1206

Listed in Chip Resistor - Surface Mount

50,048 pcs in stock ships same day before 6pm

from $0.0047

Quantity Unit Price
1 - 4,999 $0.1000
5,000+ $0.0047 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MCR18ERTF5111?

MCR18ERTF5111 is a res smd 5.11k ohm 1% 1/4w 1206, featuring a power rating of 0.25W, 1/4W, a tolerance of ±1%, a Thick Film composition, and the 1206 (3216 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

ROHM Semiconductor Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
RC1608F5491CS RES SMD 5.49K OHM 1% 1/10W 0603 620,393 $0.0081 In Stock
RC1005F2322CS RES SMD 23.2K OHM 1% 1/16W 0402 952,429 $0.0053 In Stock
RC3216F560CS RES 56 OHM 1% 1/4W 1206 2,399 RFQ In Stock
RC3225F14R0CS RES 14 OHM 1% 1/3W 1210 4,542 RFQ In Stock
RC5025F1054CS RES 1.05M OHM 1% 2/3W 2010 3,538 RFQ In Stock
RC5025F1620CS RES 162 OHM 1% 2/3W 2010 3,096 RFQ In Stock
RC1608J753CS RES SMD 75K OHM 5% 1/10W 0603 736,415 $0.0068 In Stock
RC3225F1R1CS RES 1.1 OHM 1% 1/3W 1210 2,649 RFQ In Stock
RC3216F1401CS RES 1.4K OHM 1% 1/4W 1206 2,003 RFQ In Stock
RC1608J391CS RES SMD 390 OHM 5% 1/10W 0603 50,048 $0.1000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MCR18ERTF5111 Specifications

Series MCR
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Discontinued at Digi-Key
Resistance 5.11 kOhms
Tolerance ±1%
Power (Watts) 0.25W, 1/4W
Composition Thick Film
Features -
Temperature Coefficient ±100ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case 1206 (3216 Metric)
Supplier Device Package 1206
Ratings -
Size / Dimension 0.120" L x 0.061" W (3.05mm x 1.55mm)
Height - Seated (Max) 0.026" (0.65mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CRCW12065K11FKEBC RES 5.11K OHM 1% 1/4W 1206 609,049 $0.0082 100%
CRCW12065K11FKEAC RES 5.11K OHM 1% 1/4W 1206 50,031 $0.1000 100%
CRCW12065K10FKEBC RES 5.1K OHM 1% 1/4W 1206 609,057 $0.0082 100%
CRCW12065K23FKEBC RES 5.23K OHM 1% 1/4W 1206 609,062 $0.0082 98%
CRCW12065K23FKEAC RES 5.23K OHM 1% 1/4W 1206 609,057 $0.0082 98%
CRCW12065K36FKEAC RES 5.36K OHM 1% 1/4W 1206 609,057 $0.0082 96%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

ROHM Semiconductor Parts in Stock

Request a Quote

Need MCR18ERTF5111 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.