MAX924CPE+ Maxim Integrated component image

MAX924CPE+

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC COMP QUAD W/REF 16DIP

Listed in Linear - Comparators

4,584 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX924CPE+?

MAX924CPE is a ic comp quad w/ref 16dip, featuring the 16-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MAX924CSE-T IC COMP QUAD LOW PWR 16SOIC 749 RFQ In Stock
MAX922CSA+ IC COMPARATOR DUAL LOWPWR 8-SOIC 1,417 $3.6200 In Stock
MAX921CSA-TG05 IC COMPARATOR SGL LOW PWR 8SOIC 3,251 RFQ In Stock
MAX923ESA+ IC COMP DUAL LOW PWR W/REF 8SOIC 917 $5.7600 In Stock
MAX921CUA+ IC COMP SNGL LOW PWR W/REF 8UMAX 1,161 $4.4500 In Stock
MAX923CSA-T IC COMPARATOR DUAL LOW PWR 8SOIC 4,043 RFQ In Stock
MAX921ESA-T IC COMPARATOR SGL LOW PWR 8SOIC 930 RFQ In Stock
MAX922MSA/PR-T IC COMP ULTRALOW PWR DUAL 8SOIC 4,835 RFQ In Stock
MAX922CPA+ IC COMPARATOR DUAL LOWPWR 8-DIP 4,040 RFQ In Stock
MAX921CSA+T IC COMP SNGL LOW PWR W/REF 8SOIC 1,706 $3.0100 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MAX924CPE+ Specifications

Series -
Package Tube
Part Status Obsolete
Type with Voltage Reference
Number of Elements 4
Output Type CMOS, TTL
Voltage - Supply, Single/Dual (±) 2.5V ~ 11V, ±1.25V ~ 5.5V
Voltage - Input Offset (Max) 10mV @ 5V
Current - Input Bias (Max) -
Current - Output (Typ) 50mA
Current - Quiescent (Max) 11µA
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Propagation Delay (Max) 12µs
Hysteresis -
Operating Temperature 0°C ~ 70°C
Package / Case 16-DIP (0.300", 7.62mm)
Mounting Type Through Hole
Supplier Device Package 16-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX934EPE COMPARATOR WITH REFERENCE 2,522 $2.0200 100%
MAX934CPE IC COMPARATOR QUAD W/REF 16-DIP 4,040 RFQ 100%
LTC1444IN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 743 $7.0600 90%
LTC1443CN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 807 $6.5400 90%
LTC1445IN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 986 $5.2830 90%
LTC1443IN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 992 $5.2830 90%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX924CPE+ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.