MAX934CPE+ Maxim Integrated component image

MAX934CPE+

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC COMP QUAD W/REF 16DIP

Listed in Linear - Comparators

1,904 pcs in stock ships same day before 6pm

from $1.7401

Quantity Unit Price
1 - 9 $2.6900
10 - 24 $2.4158
25 - 99 $2.2840
100 - 249 $1.9794
250 - 499 $1.8779
500+ $1.7401 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX934CPE+?

MAX934CPE is a ic comp quad w/ref 16dip, featuring the 16-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

46 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX931ESA-T IC COMPARATOR SGL W/REF 8-SOIC 4,725 RFQ In Stock
MAX932CUA+T IC COMP DUAL LOW PWR W/REF 8UMAX 1,716 $2.9640 In Stock
MAX931CPA+ IC COMPARATOR SNGL W/REF LP 8DIP 1,184 $4.4000 In Stock
MAX934ESE IC COMPARATOR QUAD W/REF 16-SOIC 2,618 RFQ In Stock
MAX931EPA+ IC COMP DUAL LOW PWR W/REF 8DIP 1,181 $4.4000 In Stock
MAX931CPA IC COMPARATOR SNGL W/REF LP 8DIP 4,041 RFQ In Stock
MAX931CUA+ IC COMP SNGL LOW PWR W/REF 8UMAX 1,365 $3.7700 In Stock
MAX933CUA+T IC COMP DUAL LOW PWR W/REF 8UMAX 1,734 $2.9640 In Stock
MAX931CUA+T IC COMP SNGL LOW PWR W/REF 8UMAX 1,933 $2.6390 In Stock
MAX932CSA+ IC COMPARATOR DUAL W/REF LP8SOIC 1,213 $4.2300 In Stock
+ 36 more variants in stock — browse the full category

Technical Parameters

MAX934CPE+ Specifications

Series -
Package Tube
Part Status Active
Type with Voltage Reference
Number of Elements 4
Output Type CMOS, TTL
Voltage - Supply, Single/Dual (±) 2.5V ~ 11V, ±1.25V ~ 5.5V
Voltage - Input Offset (Max) 10mV @ 5V
Current - Input Bias (Max) -
Current - Output (Typ) 0.015mA @ 5V
Current - Quiescent (Max) 8.5µA
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Propagation Delay (Max) 12µs
Hysteresis -
Operating Temperature 0°C ~ 70°C
Package / Case 16-DIP (0.300", 7.62mm)
Mounting Type Through Hole
Supplier Device Package 16-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX934EPE COMPARATOR WITH REFERENCE 2,522 $2.0200 100%
LTC1444IN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 743 $7.0600 90%
LTC1443CN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 807 $6.5400 90%
LTC1445IN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 986 $5.2830 90%
LTC1443IN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 992 $5.2830 90%
LTC1445CN#PBF IC COMP W/REF LOWPWR QUAD 16-DIP 1,134 $4.5692 90%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX934CPE+ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.