MAX474CPA+ Rochester Electronics component image

MAX474CPA+

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC GP OPAMP 2 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

781 pcs in stock ships same day before 6pm

from $6.7500

Quantity Unit Price
1+ $6.7500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX474CPA+?

MAX474CPA is a ic gp opamp 2 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Rochester Electronics Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX473CUA 0MHZ SINGLE-SUPPLY OP AMP 4,459 $1.1300 In Stock
MAX473EPA+ 0MHZ SINGLE-SUPPLY OP AMP 2,227 $2.2800 In Stock
MAX473CPA IC GP OPAMP 1 CIRCUIT 8DIP 2,392 $2.1200 In Stock
MAX473CUA+ 0MHZ SINGLE-SUPPLY OP AMP 2,263 $2.2400 In Stock
MAX473CPA+ IC GP OPAMP 1 CIRCUIT 8DIP 2,445 $2.0700 In Stock
MAX474EPA+ UAL 10MHZ SINGLE-SUPPLY OP AMP 1,524 $3.3700 In Stock
MAX473MJA 0MHZ SINGLE-SUPPLY OP AMP 1,054 $4.9600 In Stock
MAX475ESD IC GP OPAMP 4 CIRCUIT 14SOIC 2,125 $2.4000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MAX474CPA+ Specifications

Series -
Package Tube
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 17V/µs
Gain Bandwidth Product 12 MHz
-3db Bandwidth -
Current - Input Bias 80 nA
Voltage - Input Offset 700 µV
Current - Supply 2mA (x2 Channels)
Current - Output / Channel -
Voltage - Supply, Single/Dual (±) 2.7V ~ 5.25V, ±1.35V ~ 2.625V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX473EPA IC OPAMP GP 1 CIRCUIT 8DIP 2,945 RFQ 100%
MAX474EPA+ UAL 10MHZ SINGLE-SUPPLY OP AMP 1,524 $3.3700 100%
MCP603-I/P IC OPAMP GP 1 CIRCUIT 8DIP 9,654 $0.5200 94%
MCP601-E/P IC OPAMP GP 1 CIRCUIT 8DIP 9,483 $0.5300 94%
MCP601-I/P IC OPAMP GP 1 CIRCUIT 8DIP 10,465 $0.4800 94%
MCP603-E/P IC OPAMP GP 1 CIRCUIT 8DIP 9,136 $0.5500 94%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need MAX474CPA+ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.