MCP601-E/P Roving Networks / Microchip Technology component image

MCP601-E/P

In Stock

Roving Networks / Microchip Technology logo Roving Networks / Microchip Technology · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

9,483 pcs in stock ships same day before 6pm

from $0.4011

Quantity Unit Price
1 - 24 $0.5300
25 - 99 $0.4456
100+ $0.4011 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MCP601-E/P?

MCP601-E-P is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Roving Networks / Microchip Technology Series Variants in Stock

47 variants of this series in stock
Part Number Description Stock Unit Price Status
MCP602-E/SN IC OPAMP GP 2 CIRCUIT 8SOIC 7,625 $0.6600 In Stock
MCP601-I/ST IC OPAMP GP 1 CIRCUIT 8TSSOP 10,909 $0.4600 In Stock
MCP603-I/SN IC OPAMP GP 1 CIRCUIT 8SOIC 10,237 $0.4900 In Stock
MCP603-I/P IC OPAMP GP 1 CIRCUIT 8DIP 9,654 $0.5200 In Stock
MCP604-I/SL IC OPAMP GP 4 CIRCUIT 14SOIC 4,627 $1.0900 In Stock
MCP601T-I/OT IC OPAMP GP 1 CIRCUIT SOT23-5 12,240 $0.4100 In Stock
MCP601T-E/OTVAO IC OPAMP GP 1 CIRCUIT SOT23-5 11,393 $0.4400 In Stock
MCP603T-I/CH IC OPAMP GP 1 CIRCUIT SOT23-6 11,408 $0.4400 In Stock
MCP604T-E/STVAO IC OPAMP GP 4 CIRCUIT 14TSSOP 2,175 RFQ In Stock
TLC27M4CNSR IC OPAMP GP 4 CIRCUIT 14SOP 4,204 $1.2000 In Stock
+ 37 more variants in stock — browse the full category

Technical Parameters

MCP601-E/P Specifications

Series -
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 2.3V/µs
Gain Bandwidth Product 2.8 MHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 700 µV
Current - Supply 230µA
Current - Output / Channel 22 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 6V
Operating Temperature -40°C ~ 125°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MCP603-I/P IC OPAMP GP 1 CIRCUIT 8DIP 9,654 $0.5200 100%
MCP601-I/P IC OPAMP GP 1 CIRCUIT 8DIP 10,465 $0.4800 100%
MCP603-E/P IC OPAMP GP 1 CIRCUIT 8DIP 9,136 $0.5500 100%
MCP602-I/P IC OPAMP GP 2 CIRCUIT 8DIP 7,967 $0.6300 100%
MCP602-E/P IC OPAMP GP 2 CIRCUIT 8DIP 7,282 $0.6900 100%
MAX474EPA+ UAL 10MHZ SINGLE-SUPPLY OP AMP 1,524 $3.3700 94%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Roving Networks / Microchip Technology Parts in Stock

Request a Quote

Need MCP601-E/P or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.