MAX4580CPE+ Maxim Integrated component image

MAX4580CPE+

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC SWITCH DUAL SPST 16DIP

Listed in Interface - Analog Switches, Multiplexers, Demultiplexers

3,472 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX4580CPE+?

MAX4580CPE is a ic switch dual spst 16dip, featuring the 16-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Maxim Integrated Series Variants in Stock

27 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX4590CAE+ IC SWITCH DUAL SPST 16SSOP 641 $8.3200 In Stock
MAX4580CWE IC SWITCH DUAL SPST 16SOIC 3,146 RFQ In Stock
MAX4600CAE+T IC SWITCH DUAL SPST 16SSOP 1,297 $4.0040 In Stock
MAX4600EAE IC SW DUAL ANLG CMOS SPST 16SSOP 2,322 RFQ In Stock
MAX4580CAE+T IC SWITCH DUAL SPST 16SSOP 1,296 $4.0040 In Stock
MAX4600EWE+ IC SWITCH DUAL SPST 16SOIC 429 $12.9565 In Stock
MAX4580EWE IC SW DUAL ANLG CMOS SPST 16SOIC 618 RFQ In Stock
MAX4600CAE+ IC SWITCH DUAL SPST 16SSOP 384 $14.7100 In Stock
MAX4580CAE IC SWITCH DUAL SPST 16SSOP 3,597 RFQ In Stock
MAX4580EPE IC SW DUAL ANLG CMOS SPST 16-DIP 3,263 RFQ In Stock
+ 17 more variants in stock — browse the full category

Technical Parameters

MAX4580CPE+ Specifications

Series -
Package Tube
Part Status Obsolete
Switch Circuit SPST - NC
Multiplexer/Demultiplexer Circuit 1:1
Number of Circuits 2
On-State Resistance (Max) 1.25Ohm
Channel-to-Channel Matching (ΔRon) 500mOhm
Voltage - Supply, Single (V+) 4.5V ~ 36V
Voltage - Supply, Dual (V±) ±4.5V ~ 20V
Switch Time (Ton, Toff) (Max) 160ns, 210ns
-3db Bandwidth -
Charge Injection -60pC
Channel Capacitance (CS(off), CD(off)) 115pF
Current - Leakage (IS(off)) (Max) 500pA
Crosstalk -65dB @ 1MHz
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Through Hole
Package / Case 16-DIP (0.300", 7.62mm)
Supplier Device Package 16-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX4580EPE IC SW DUAL ANLG CMOS SPST 16-DIP 3,263 RFQ 100%
MAX4580CPE DUAL SPST ANALOG SWITCH 1,066 $4.9200 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX4580CPE+ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.