MAX4252EBL-T Maxim Integrated component image

MAX4252EBL-T

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC OPAMP GP 2 CIRCUIT 8UCSP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

4,340 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX4252EBL-T?

MAX4252EBL-T is a ic opamp gp 2 circuit 8ucsp, featuring the 8-WFBGA, CSPBGA package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

38 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX4257ESA+ IC OPAMP GP 2 CIRCUIT 8SOIC 2,374 $2.1500 In Stock
MAX4251EUA+ IC OPAMP GP 1 CIRCUIT 8UMAX 2,364 $2.1500 In Stock
MAX4253EUB+ IC OPAMP GP 2 CIRCUIT 10UMAX 1,583 $3.2600 In Stock
MAX4250EUK+T IC OPAMP GP 1 CIRCUIT SOT23-5 3,857 $1.3100 In Stock
MAX4257EUA-T IC OPAMP GP 2 CIRCUIT 8UMAX 2,119 RFQ In Stock
MAX4256ESA+ IC OPAMP GP 1 CIRCUIT 8SOIC 2,513 $2.0200 In Stock
MAX4253ESD+T IC OPAMP GP 2 CIRCUIT 14SOIC 929 RFQ In Stock
MAX4249EUB+T IC OPAMP GP 2 CIRCUIT 10UMAX 3,387 $1.4950 In Stock
MAX4254ESD+T IC OPAMP GP 4 CIRCUIT 14SOIC 1,181 RFQ In Stock
MAX4249ESD+ IC OPAMP GP 2 CIRCUIT 14SOIC 2,382 $2.1300 In Stock
+ 28 more variants in stock — browse the full category

Technical Parameters

MAX4252EBL-T Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 2
Output Type Push-Pull, Rail-to-Rail
Slew Rate 0.3V/µs
Gain Bandwidth Product 3 MHz
-3db Bandwidth -
Current - Input Bias 0.1 pA
Voltage - Input Offset 70 µV
Current - Supply 420µA (x2 Channels)
Current - Output / Channel 68 mA
Voltage - Supply, Single/Dual (±) 2.4V ~ 5.5V, ±1.2V ~ 2.75V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-WFBGA, CSPBGA
Supplier Device Package 8-UCSP (1.6x1.6)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX4252EBL+TG45 UCSP, SINGLE-SUPPLY, LOW-NOISE, 4,478 RFQ 100%
MAX4252EBL+T IC OPAMP GP 2 CIRCUIT 8UCSP 2,500 $2.0300 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX4252EBL-T or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.