MAX2180ETG+T Maxim Integrated component image

MAX2180ETG+T

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC AMP AM FM 148KHZ-30MHZ 24TQFN

Listed in RF Amplifiers

1,106 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX2180ETG+T?

MAX2180ETG-T is a ic amp am fm 148khz-30mhz 24tqfn, featuring a frequency of 148kHz ~ 30MHz, 65MHz ~ 162.5MHz, the 24-WFQFN Exposed Pad case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Maxim Integrated Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX17830GUN/V+T IC BATT MFUNC 56TSSOP 408 $13.3640 In Stock
MAX17830GUN/V+ IC BATT MFUNC 56TSSOP 362 $15.8169 In Stock
MAX2172ETL/V+ IC TUNER LOW IF CONV DGTL 40TQFN 714 $7.3900 In Stock
MAX2172ETL+ IC TUNER LOW IF CONV DGTL 40TQFN 847 $6.2100 In Stock
MAX2172ETL+T IC TUNER LOW IF DGTL 40TQFN 1,159 $4.4590 In Stock
MAX2135AETN+T IC TUNER DIVERS SDB/DVB-T 56TQFN 1,392 RFQ In Stock
MAX2135AETN/V+ IC TUNER DIVERS SDB/DVB-T 56TQFN 476 $11.3100 In Stock
MAX17830GUN+ IC BATT MGMT MFUNC 56TSSOP 475 $11.5143 In Stock
MAX17830GUN+T IC BATT MFUNC 56TSSOP 601 $8.9440 In Stock
MAX2172EVKIT+ KIT EVAL FOR MAX2172 46 $456.8300 In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

MAX2180ETG+T Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Frequency 148kHz ~ 30MHz, 65MHz ~ 162.5MHz
P1dB -
Gain 30dB
Noise Figure 3.7dB
RF Type AM, FM
Voltage - Supply 8V ~ 24V
Current - Supply 78mA
Test Frequency -
Mounting Type Surface Mount
Package / Case 24-WFQFN Exposed Pad
Supplier Device Package 24-TQFN-EP (4x4)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX2180ETG+T or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.