MSA-2011-TR1G Broadcom component image

MSA-2011-TR1G

In Stock

Broadcom logo Broadcom · franchised distributor

IC RF AMP ISM 0HZ-1GHZ SOT143-4

Listed in RF Amplifiers

1,276 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MSA-2011-TR1G?

MSA-2011-TR1G is a ic rf amp ism 0hz-1ghz sot143-4, featuring a frequency of 0Hz ~ 1GHz, the TO-253-4, TO-253AA case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Broadcom Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
MSA-2011-BLKG IC RF AMP ISM 0HZ-1GHZ SOT143-4 3,015 RFQ In Stock
MSA-2086-BLKG IC AMP ISM 0HZ-1GHZ 85 MIL MICRO 3,187 RFQ In Stock
MSA-2011-TR2G IC RF AMP ISM 0HZ-1GHZ SOT143-4 3,690 RFQ In Stock
MSA-2086-TR1G IC AMP ISM 0HZ-1GHZ 85 MIL MICRO 4,372 RFQ In Stock
MSA-2086-TR2G IC AMP ISM 0HZ-1GHZ 85 MIL MICRO 4,998 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MSA-2011-TR1G Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Frequency 0Hz ~ 1GHz
P1dB 9dBm
Gain 15dB ~ 16.2dB
Noise Figure 4.3dB
RF Type ISM
Voltage - Supply 4V ~ 6V
Current - Supply 20mA ~ 40mA
Test Frequency 1GHz
Mounting Type Surface Mount
Package / Case TO-253-4, TO-253AA
Supplier Device Package SOT-143-4

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MSA-2011-TR2G IC RF AMP ISM 0HZ-1GHZ SOT143-4 3,690 RFQ 100%
MSA-0711-TR2G IC AMP ISM 0HZ-1.9GHZ SOT143-4 4,847 RFQ 64%
MSA-0711-TR1G IC AMP ISM 0HZ-1.9GHZ SOT143-4 4,121 RFQ 64%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Broadcom Parts in Stock

Request a Quote

Need MSA-2011-TR1G or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.