MAF95096 Laird - Antennas component image

MAF95096

In Stock

Laird - Antennas logo Laird - Antennas · franchised distributor

RF ANT 2.4/5.5GHZ FLAT PATCH CAB

Listed in RF Antennas

1,297 pcs in stock ships same day before 6pm

from $3.9585

Quantity Unit Price
1 - 240 $3.9585 BEST
241+ $3.9585 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAF95096?

MAF95096 is a rf ant 2.4/5.5ghz flat patch cab, featuring the Bulk package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Laird - Antennas Series Variants in Stock

25 variants of this series in stock
Part Number Description Stock Unit Price Status
MAF95050 RF ANT 868MHZ/900MHZ PCB TRACE 1,036 RFQ In Stock
CAF93512 RF ANT 2.4GHZ CHIP SOLDER SMD 2,908 $1.7400 In Stock
MAF94016 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 806 $6.5000 In Stock
MAF94045 RF ANT 2.4GHZ PCB TRACE CAB SMD 1,873 $2.7400 In Stock
MAF94007 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 800 RFQ In Stock
MAF95022 RF ANT 868MHZ/900MHZ PCB TRACE 1,743 RFQ In Stock
MAF95098 RF ANT 2.4GHZ PCB TRACE CAB SMD 3,385 RFQ In Stock
MAF95017 RF ANT 868MHZ/900MHZ PCB TRACE 1,404 $3.6855 In Stock
MAF94106 RF ANT 2.4GHZ/5.5GHZ U.FL 542 $10.1224 In Stock
MAF94015 RF ANT 2.4GHZ WHIP/TILT SNAP-IN 4,521 RFQ In Stock
+ 15 more variants in stock — browse the full category

Technical Parameters

MAF95096 Specifications

Series NanoBlade
Package Bulk
Part Status Active
RF Family/Standard Bluetooth, WiFi
Frequency Group UHF (2GHz ~ 3GHz), SHF (f > 4GHz)
Frequency (Center/Band) 2.4GHz, 5.5GHz
Frequency Range 2.4GHz ~ 2.5GHz, 4.9GHz ~ 6GHz
Antenna Type Flat Patch
Number of Bands 3
VSWR -
Return Loss -
Gain 2.8dBi, 4dBi
Power - Max -
Features Cable - 100mm
Termination U.FL (UMCC), IPEX MHF1
Ingress Protection -
Mounting Type Surface Mount
Height (Max) 0.650" (16.51mm)
Applications Bluetooth, WLAN

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAF94153 RF ANT 2.4GHZ/5.5GHZ FLAT PATCH 1,778 $2.8860 100%
MAF94196 ANT WHIP QW 1/4.2.4GHZ 2,250 $2.2570 100%
MAF95061 RF ANT 2.4/5.5GHZ FLAT PATCH CAB 1,638 $3.1265 100%
MAF95037 ANT EMB NANO 802.11BA IPEX 1,907 $2.6715 100%
MAF94383 RF ANT 2.4GHZ/5.5GHZ PCB TRACE 1,998 $2.5400 100%
MAF95060 RF ANT 2.4GHZ PCB TRACE CAB SMD 1,775 $2.8860 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Laird - Antennas Parts in Stock

Request a Quote

Need MAF95096 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.