CAF93512 Laird - Antennas component image

CAF93512

In Stock

Laird - Antennas logo Laird - Antennas · franchised distributor

RF ANT 2.4GHZ CHIP SOLDER SMD

Listed in RF Antennas

2,908 pcs in stock ships same day before 6pm

from $0.7375

Quantity Unit Price
1 - 1,999 $1.7400
2,000 - 5,999 $0.7965
6,000 - 9,999 $0.7670
10,000+ $0.7375 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CAF93512?

CAF93512 is a rf ant 2.4ghz chip solder smd, featuring the Tape & Reel (TR)Cut Tape (CT)Digi-Reel® package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Laird - Antennas Series Variants in Stock

25 variants of this series in stock
Part Number Description Stock Unit Price Status
MAF95050 RF ANT 868MHZ/900MHZ PCB TRACE 1,036 RFQ In Stock
MAF94016 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 806 $6.5000 In Stock
MAF94045 RF ANT 2.4GHZ PCB TRACE CAB SMD 1,873 $2.7400 In Stock
MAF94007 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 800 RFQ In Stock
MAF95022 RF ANT 868MHZ/900MHZ PCB TRACE 1,743 RFQ In Stock
MAF95098 RF ANT 2.4GHZ PCB TRACE CAB SMD 3,385 RFQ In Stock
MAF95017 RF ANT 868MHZ/900MHZ PCB TRACE 1,404 $3.6855 In Stock
MAF94106 RF ANT 2.4GHZ/5.5GHZ U.FL 542 $10.1224 In Stock
MAF94015 RF ANT 2.4GHZ WHIP/TILT SNAP-IN 4,521 RFQ In Stock
MAF94260 RF ANT 2.4GHZ WHIP STR RP-TNC 1,068 $4.8950 In Stock
+ 15 more variants in stock — browse the full category

Technical Parameters

CAF93512 Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
RF Family/Standard Bluetooth, WiFi
Frequency Group UHF (2GHz ~ 3GHz)
Frequency (Center/Band) 2.4GHz
Frequency Range 2.4GHz ~ 2.5GHz
Antenna Type Chip
Number of Bands 1
VSWR 3
Return Loss -
Gain -
Power - Max -
Features -
Termination Solder
Ingress Protection -
Mounting Type Surface Mount
Height (Max) 0.079" (2.00mm)
Applications Bluetooth, Wi-Fi

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AH316M245001-T RF ANT 2.4GHZ CHIP SOLDER SMD 1,303 $3.9800 100%
SWLP.2450.12.4.B.02 RF ANT 2.4GHZ CER PATCH SLDR SMD 691 $7.7200 100%
AH104N2450D1-T RF ANT 2.4GHZ/5.4GHZ CHIP SLD 879 $5.9500 100%
2450AT43A100E RF ANT 2.4GHZ CHIP SOLDER SMD 5,994 $0.8400 100%
M830320 RF ANT 2.4GHZ CHIP SOLDER SMD 2,679 $1.8900 100%
1002295 RF ANT 2.4GHZ STAMPED MET SLD 2,681 $1.8900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Laird - Antennas Parts in Stock

Request a Quote

Need CAF93512 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.