MAF94003 Laird - Antennas component image

MAF94003

In Stock

Laird - Antennas logo Laird - Antennas · franchised distributor

RF ANT 2.4GHZ/5.5GHZ WHIP RA CAB

Listed in RF Antennas

3,211 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAF94003?

MAF94003 is a rf ant 2.4ghz/5.5ghz whip ra cab, featuring the Bulk package. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Laird - Antennas Series Variants in Stock

25 variants of this series in stock
Part Number Description Stock Unit Price Status
MAF95050 RF ANT 868MHZ/900MHZ PCB TRACE 1,036 RFQ In Stock
CAF93512 RF ANT 2.4GHZ CHIP SOLDER SMD 2,908 $1.7400 In Stock
MAF94016 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 806 $6.5000 In Stock
MAF94045 RF ANT 2.4GHZ PCB TRACE CAB SMD 1,873 $2.7400 In Stock
MAF94007 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 800 RFQ In Stock
MAF95022 RF ANT 868MHZ/900MHZ PCB TRACE 1,743 RFQ In Stock
MAF95098 RF ANT 2.4GHZ PCB TRACE CAB SMD 3,385 RFQ In Stock
MAF95017 RF ANT 868MHZ/900MHZ PCB TRACE 1,404 $3.6855 In Stock
MAF94106 RF ANT 2.4GHZ/5.5GHZ U.FL 542 $10.1224 In Stock
MAF94015 RF ANT 2.4GHZ WHIP/TILT SNAP-IN 4,521 RFQ In Stock
+ 15 more variants in stock — browse the full category

Technical Parameters

MAF94003 Specifications

Series -
Package Bulk
Part Status Obsolete
RF Family/Standard WiFi
Frequency Group UHF (2GHz ~ 3GHz), SHF (f > 4GHz)
Frequency (Center/Band) 2.4GHz, 5.5GHz
Frequency Range 2.4GHz ~ 2.5GHz, 4.9GHz ~ 6GHz
Antenna Type Whip, Right Angle
Number of Bands 2
VSWR 2
Return Loss -
Gain 2dBi, 3.6dBi
Power - Max -
Features Cable - 100mm
Termination U.FL (UMCC), IPEX MHF1
Ingress Protection -
Mounting Type Snap-In
Height (Max) 4.000" (101.60mm)
Applications WLAN

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAF94016 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 806 $6.5000 100%
MAF94017 RF ANT 2.4GHZ WHIP/TILT SNAP-IN 826 $6.3900 100%
MAF94007 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 800 RFQ 100%
MAF94096 RF ANT 2.4GHZ WHIP STR IPEX MHF 3,089 RFQ 100%
MAF94134 RF ANT 2.4GHZ WHIP STR IPEX MHF 2,329 RFQ 100%
MAF94006 RF ANT 2.4GHZ/5.5GHZ WHIP TILT 1,261 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Laird - Antennas Parts in Stock

Request a Quote

Need MAF94003 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.