LX5575LL-TR Roving Networks / Microchip Technology component image

LX5575LL-TR

In Stock

Roving Networks / Microchip Technology logo Roving Networks / Microchip Technology · franchised distributor

IC RF AMP

Listed in RF Amplifiers

15,467 pcs in stock ships same day before 6pm

from $0.3240

Quantity Unit Price
1 - 4,499 $0.3240 BEST
4,500+ $0.3240 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LX5575LL-TR?

LX5575LL-TR is a ic rf amp, featuring a frequency of 5.15GHz ~ 5.85GHz, the 16-XFQFN Exposed Pad case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Roving Networks / Microchip Technology Series Variants in Stock

17 variants of this series in stock
Part Number Description Stock Unit Price Status
LX5584BLQ-TR 2.5G FRONT-END MODULE 5V, 3X3X0. 9,309 $0.5400 In Stock
LX5584BLQ 2.5G FRONT-END MODULE 5V, 3X3X0. 7,454 $0.6750 In Stock
LX5589BLQ-TR 5G FRONT-END MODULE 5V, 3X3X0.9 9,719 $0.5160 In Stock
LX5589BLQ 5G FRONT-END MODULE 5V, 3X3X0.9 7,788 $0.6450 In Stock
LX5533LQ-TR IC RF AMP 2.41GHZ-2.48GHZ 16QFN 7,152 $0.7020 In Stock
LX5531LQ-TR IC RF AMP 5,112 $0.9855 In Stock
LX5591LQ-TR 5G FRONT END MODULE 4,474 $1.1280 In Stock
LX5589HLQ-TR 5G FRONT-END MODULE 5V, 2.5X2.5X 9,965 $0.5040 In Stock
LX5589ALQ 5G FRONT-END MODULE 3.3V, 2.5X2. 8,169 $0.6150 In Stock
LX5584HLQ-TR 2.5G FRONT-END MODULE 5V, 2.5X2. 9,106 $0.5520 In Stock
+ 7 more variants in stock — browse the full category

Technical Parameters

LX5575LL-TR Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Frequency 5.15GHz ~ 5.85GHz
P1dB -
Gain 12dB
Noise Figure 1.7dB
RF Type 802.11a/-c
Voltage - Supply 3.3V ~ 5V
Current - Supply 9mA
Test Frequency -
Mounting Type Surface Mount
Package / Case 16-XFQFN Exposed Pad
Supplier Device Package 16-QFN (2.5x2.5)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Roving Networks / Microchip Technology Parts in Stock

Request a Quote

Need LX5575LL-TR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.