LP2992IM5X-1.8 Rochester Electronics component image

LP2992IM5X-1.8

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR FIXED POS LDO REG

Listed in PMIC - Voltage Regulators - Linear

20,037 pcs in stock ships same day before 6pm

from $0.2500

Quantity Unit Price
1+ $0.2500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP2992IM5X-1.8?

LP2992IM5X-1-8 is a ic reg linear fixed pos ldo reg, featuring the SC-74A, SOT-753 package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
LP2992AIM5X-1.5/NOPB IC REG LINEAR 1.5V 250MA SOT23-5 10,238 $0.4900 In Stock
LP2992AIM5-1.8 IC REG LINEAR FIXED POS LDO REG 9,659 $0.5200 In Stock
LP2992AILD-1.8 IC REG LINEAR 1.8V 250MA 6WSON 9,654 $0.5200 In Stock
LP2992IM5-5.0 IC REG LINEAR FIXED POS LDO REG 9,658 $0.5200 In Stock
MC33463H-50KT1 IC REG LIN SWITCHING VOLT MODE 9,657 $0.5200 In Stock
LP2992IM5-1.5 IC REG LINEAR 1.5V 250MA SOT23-5 20,032 $0.2500 In Stock
LP2992ILDX-5.0 IC REG LINEAR FIXED POS LDO REG 17,900 $0.2800 In Stock
LP2992AIM5X-2.5 IC REG LINEAR FIXED POS LDO REG 8,235 $0.6100 In Stock
MAX8841ELT26+T IC REG LINEAR ULTRA LO NOISE LDO 9,657 $0.5200 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LP2992IM5X-1.8 Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 16V
Voltage - Output (Min/Fixed) 1.8V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.85V @ 250mA
Current - Output 250mA
Current - Quiescent (Iq) 95 µA
Current - Supply (Max) 4 mA
PSRR 45dB (1kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Supplier Device Package SOT-23-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LP2992IM5X-1.8 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.